How to use a soybean milk machine? The most comprehensive use of soybean milk machine steps

Soybean milk machine working principle:

Add the right amount of water, warm water or cold water can be, power on the "pulp" function, the heat pipe began to heat, 25 minutes after the water temperature reached the set temperature.

Pre-pulping stage, when the water temperature reaches the set temperature, the motor begins to work, the first pre-pulping, and then continue to heat the touch and overflow electrodes to reach the pulping temperature, pulping/heating stage, in the stage of non-stop pulping and heating, so that the beans are thoroughly crushed, soybean milk preliminary boiling, boiling, soybean milk after boiling, enter the boiling stage, the repeated gap heating heating heating tube, so that the soybean milk is fully cooked, completely emulsified. cooked and completely emulsified.

How to use the soybean milk machine?

Soybean milk maker steps 1, soak the beans: after soaking the beans will not be too hard, so that it is easier to extract soybean milk. With a soybean milk machine with dry beans measuring cup according to the 2/3 scale line out of dry beans, washed and soaked in water, spring and fall soaking time for 8-16 hours, summer for 6-10 hours, winter for 10-16 hours. If you want to speed up the soaking time, you can choose to soak in warm water, which can be shortened to 2 to 3 hours. But it is still more appropriate to follow the general practice.

Soymilk machine use step 2, the cup body to add beans and rice: for the bean measuring cup according to the 2/3 scale measurement of rice, along with the soaked beans washed and put directly into the cup body.

Soybean milk machine step 3, add water to the cup: generally there will be a water level line in the cup. Add the water between the upper and lower levels.

Soymilk maker step 4, Rafal net installation or grain mill: take the Rafal net according to the or grain mill installation instructions in the direction of the arrow to install,

Rafal net mouth and the head of the machine should be close to the gap, after the installation is complete, pull down with your hand, the Rafal net does not move, that is, the installation is in place.

Soybean milk machine steps 5, make soybean milk: the head of the correct position into the cup, plug in the power cord, the power indicator light, press the soybean milk Jian, the corresponding indicator light, start the whole nutrition soybean milk program. When the soybean milk is ready, there will be a prompt light or beep sound, then the soybean milk is ready.

Soybean milk machine use step 6, the completion of the pulp: the machine according to the set program for a number of pulp and fully boiled, the heater and the motor to stop working, the machine issued a sound and light alarm, suggesting that the soybean milk has been done. The machine is ready to be used for drinking.

Soybean milk machine use step 7, filter soybean milk (only dry beans / wet beans soybean milk function): in the production of dry beans / wet beans soybean milk, pulp, slag together simmering, nutritional release more fully,

users can according to their own preferences, the use of randomly attached to the filter on the soybean milk filtration, you can make the taste more delicate.

The most comprehensive soybean milk machine use steps? The full content of this article, I believe that after reading this article for soybean milk machine how to use a basic understanding, if you still want to know more about the decoration advice, please click into the decoration knowledge channel.