Step 1
First, prepare a square piece of paper. Fold the four corners in half along the diagonal, and then unfold them, leaving creases.
Second step
Turn it over, fold the top, bottom, left and right sides in half respectively, and unfold it to form a herringbone crease.
Third step
Sandwich two adjacent edges in a small square crease and fold them together.
Fourth step
Then put two adjacent edges in the opposite small square crease and fold them together. This forms a double square.
Step five
Fold the front and rear four sides of the fork towards the center line and align them.
Step 6
Turn the top corners along the sides of two triangles.
Step 7
Expand to form a crease as shown in the figure.
Step 8
Turn the lower corner up and press the crease in the middle.
Step 9
Fold the four sides of the front inward along the crease to form this shape. The back operation is the same.
Step 10
Fold the two waists of the upper isosceles triangle to the bottom of the triangle and align them. Then unfold, leaving a crease.
Step 1 1
Fold the crease left in the last step out of the shape on the drawing together with the center line.
Step 12
Press the vertical angle to one side.
Step 13
It is the same operation mode in the back, just press the vertical angle in the opposite direction.
Step 14
Swap the four sides of the front and back (the front and left parts are folded to the right and aligned. At the back, the right part is folded to the left and aligned). As shown in the figure.
Step 15
Fold the two corners on the lower side of the front and back respectively so that they are aligned with the corners on the upper side.
Step 16
Then follow the operation methods of step 10, step1,step 12 and step 13 to obtain such a shape.
Step 17
As shown, separate all eight corners.
Step 18
Then dig out one of the long corners, and the corner tip rolls down slightly. In this way, a petal is folded.
Step 19
The other three long horns do the same thing, always folding out four petals like this. Adjust the shape to make the beautiful flowers fold.