1. Place the silicone pad on the printing table, close the pressure handle (adjust the pressure to a moderate level), plug in the power, turn on the main power switch (red), and the indicator light will light up;

2. Adjust the dial on the thermostat to the required temperature (180℃-190℃), and the heating time is about 1-2 minutes;

3. Adjust the dial on the timer. to the appropriate time (100-120 seconds)

4. When the temperature reaches the set value, the machine will automatically enter the constant temperature state;

5. Open the pressure handle, and then press the Place the porcelain plate with the picture on the printing table (the size of the image page must be larger than the size of the baking pad to prevent the surface of the porcelain plate from being scorched and indentation), close the pressure handle rocker, and clear the timer;

6. When the time reaches the set value, the buzzer will sound, the heating pad will stop heating, and

turn off the main power switch. At this time, open the pressure handle, remove the porcelain plate (be sure to immerse it in cold water after taking it out to prevent the ink from continuing to spread), and wipe it dry.

Note: When the baking pan machine is not in use, be sure to turn off the power and press down the pressure handle at the same time (the pressure does not need to be too high, as long as it can be kept flat).