Installation instructions:
1, if the computer doesn't have a system, you need to use another available computer to make a USB flash drive.
2. This paper introduces the method of installing ghostwin 10 on uefipe. Before reinstalling, it is necessary to back up the important files on the C disk and desktop, and it needs win 1064 bit system.
Related tutorials:
Illustration of steps of installing win 10 on U disk of Chinese cabbage (traditional way of legacymbr)
Uefigpt mode installation win 10 official system tutorial (non-ghost)
How to see if the motherboard supports UEFI mode?
How to install win 10 system with wepe (uefi installation, supporting images larger than 4G)
I. Preparation for Installation
1, uefi computer, 8G USB flash drive.
2. win 10 system download: ghostwin 1064-bit Extreme Speed Flagship V20 17. 12.
3, Chinese cabbage peuefi version: uefi startup U disk production method
Second, the startup settings
Method of setting UEFI startup on computer
USB flash drive system startup hotkey daquan
If you have these options in your BIOS, please set them as follows. Generally, win 10 models do not need to be set:
SecureBoot is set to Disabled to disable starting security check, which is the most important.
OSOptimized is set to Others or Disabled system type setting.
Csm (compatibility support module) support is set to Yes or Enabled.
UEFI/LegacyBoot option is selected to Both.
UEFI/LegacyBootPriority is selected as UEFIFirst.
Iii. the steps of installing win 10 system on USB flash drive are as follows
1, after the Chinese cabbage uefipe starts the USB flash drive, copy the iso image of the win 1064 bit system directly to the gho directory; 2. Insert a USB flash drive into the computer. After starting, keep pressing the shortcut keys such as F 12 or F 1 1 or Esc. The startup keys of different computers are different. In the pop-up startup item selection box, select the identified USB flash drive option. If there is a startup item with uefi, select the uefi item and enter to boot from UEFI.
3. Due to different production methods, some Chinese cabbage uefipe startup disks will directly enter the pe system, and some will display this main interface first. If this interface is displayed first, press the ↓ arrow key to select 02 and enter to run win8PEx64；;
4. After entering the Chinese cabbage pe system, if it was pre-installed with win 10, that is, guided by uefi, directly execute Step 7. If it is a new hard disk, double-click the DG partition tool on the desktop, right-click the hard disk, and click Quick Partition;
5. Select GUID as the partition table type, that is, GPT, and then set the number of partitions and the size of the system disk. It is recommended that it be more than 50G. For solid-state hard disks, you need to check the alignment partition to this sector, and the sector defaults to 2048, so you can confirm.
6. After that, the hard disk partition and formatting process will be performed. As shown in the figure, the gpt partition table will have two additional partitions, ESP and MSR.
7. Then double-click to open the Chinese cabbage PE one-click loader, select win 10x64iso file for the GHOWIMISO image path, and then click the drop-down box, and the tool will automatically extract win 10.gho file and select win 10.gho file;
8. Then select the restore partition, and choose the installation location of win 10 system, usually drive C. If it is not drive C, choose according to the label system or the size of hard disk, and click OK.
9. This dialog box pops up, check the options of restart and boot repair after completion, and click Yes to perform the next operation;
10, go to this interface, execute the process of installing win 10 system to drive C, and wait for the progress bar to be completed, usually about 2-5 minutes;
1 1, after the operation is completed, you will be prompted that the computer is about to restart. The default is to restart automatically after 10 seconds, or click Yes to restart the computer immediately;
12. Pull out the USB flash drive at this time, and it will automatically enter this interface to continue the installation of components, drivers and system configuration of win 10 system;
13. The whole installation process takes 5- 10 minutes. After booting into the win 10 desktop, the process of completely installing the win 10 system on the U disk ends.
These are the steps to install win 10 system on USB flash drive. Here is the method to install win 10 system through uefi. If you need to install Win10 system on your computer, you can follow the above steps.