The most practical methods for drifting and drifting in wild fishing are: fishing for lead, long pole and short line, hanging lead on the bottom hook, and heavy lead for large drifts.

1. Fishing for lead. This is the most common and simplest method when walking on water. The so-called lead running means that the space bean on the lead seat pulls upward for a certain distance to realize the sliding of the lead seat. In this way, when there is a fish signal, the line can move and the lead will not move, and the signal can also be transmitted to the float.

Note: In the lead fishing method, the lead skin is slightly heavier than the draft of the float. Use heavy lead to level the water, and then move the float up to the fishing eye you are used to; the sub-line must be short. If the sub-line is too long, the fish will The hook-biting signal is extremely inconspicuous; the space bean above the lead seat moves the same distance as the fishing eye, and the space bean above the lead seat only needs to move upward for three eye distances.

2. Long pole and short line. This is an unconventional method and should be used with caution. After adjusting the float, use a short line when the water is serious. You can use the wind line to hold the water line and the fish float to prevent it from drifting. Note: Need to increase the line set. It is difficult to detect small fish signals. If you catch a big fish, using a short line will make it more difficult to catch the fish, so it is recommended to change to a larger line set.

3. Hang lead on the bottom hook and bait on a single hook. This method is actually the same as the first one. They both fix the water line by adding weight to the lead pendant to offset the water leakage. The difference is that lead is added to the bottom hook and only the top hook is used for fishing. Note: The bottom hook must be hanging lead and cannot be confused; when adjusting the float, the bottom hook must touch the bottom and the upper hook is suspended.

4. Big drift and heavy lead. A simple sentence is: fix it with heavy lead, and then use large float to adapt to the weight of the lead.