1, nozzle blocked
In order to make the sprayed water uniform and delicate, some spray cans have many small holes in their nozzles. But because there are many small holes in the design, it may be blocked. So we need to check whether the sprinkler is blocked, so that the sprinkler can't spray water. Then we can carefully wipe the nozzle with a soft towel to see if there are some small particles blocking some nozzles, which makes the watering can not spray water.
2. The nozzle is concave
Maybe the nozzle of the watering can is concave. The main reason is that the watering can is used too hard, and the nozzle will sink in after a long time. If this is the case, we just need to pull out the nozzle and continue spraying water from the watering can. Moreover, we can use less force when using the spray bottle in the future, so that this problem will not appear again.
3. Nozzle problem
It may be the nozzle of the watering can, because we haven't turned for a long time, so we are fixed in the same position. At this time, we only need to turn the nozzle left and right to spray water easily.
Repair method of small watering can without spraying;
1, the simplest reason why the watering can doesn't spray is that it uses dirty water. Dirty water is easy to block the passage, and the small watering can't spray water.
2. Remove the watering can and pour the nozzle back into the water. Water should flood the passage of the straw. Then press the wrench of the nozzle and observe carefully. There are small bubbles up and down at first, so you can't spray water. At this time, you must continue to press the wrench.
When the bubbles stop rising and falling, press the wrench again and the water will come out. Keep pressing to rinse off all dirt. Pay attention to the direction of spraying water, stay away from the crowd, and pay attention to adding water when you have a mobile phone. When water can't flood the passage of the suction pipe, there is no water flowing out.
4. At this point, after all components are installed, normal spraying can be carried out. At this time, pay attention to adjust the water cap of the nozzle. If the water cover is too loose, it will leak easily.