The windmill craft is made as follows:

Method 1:

1. Take a 15 cm square of paper and fold it crosswise along the diagonal, cut it along the four folds, and leave the center part uncut.

2. Unfold the folded paper, apply solid adhesive in the center, and glue the cut corners to the center one at a time.

3. Roll the 7.5x15 cm origami paper diagonally into a paper bar and secure it.

4. Simply insert a nice looking nail in the center of the first fold, with the back side through the paper bar.

Method 2:

1. Prepare materials: paper, scissors, pins, sticks.

2. Cut the paper into a square and then fold it twice along the diagonal.

3. Cut 2/3 along the diagonal, then pull the four cut corners to the end in counterclockwise order.

4. Finally, just pass a large head pin through the center point and secure it to the stick.

Method 3:

1. Prepared materials: scissors color paper? Double-sided adhesive? Cotton swabs.

2. A piece of 15x15cm colored paper folded twice diagonally.

3. Use scissors to cut all four sides.

4. Paste the glue in the center Fold the cut paper to the center of the center and paste it together.

5. Roll a stick of colored paper.

6. Cut a cotton swab to the right length.

7. Put a hole in the center of the pinwheel and the paper stick.

8. Put the cotton swab through the two holes and fix the windmill head and stick together. A super fun windmill is finished.

Method 4:

1. Measure the size with a ruler and pencil as below.

2, use scissors to cut all four sides and fold all the cut paper towards the center of the center.

3. Use a button to hold all the corners of the center point together, and thread a piece of string through the button on the opposite side.

4. Place the plastic stick into the center of the string and tie the string in a knot.

5, choose a beautiful brooch for the center, as shown below.

Pin the brooch on the front of the windmill to complete the whole production.

Method 5:

1, choose a piece of paper with hardness, with a ruler and a carving knife, from the four corners of the square paper to the center of a cut, be careful not to cut to the end.

2. Dig five small holes in the area shown in the picture.

3. Fold the corners with the holes, without making creases.

4. Fold it into a criss-cross shape.

5. Pass a large head pin through the five small holes that overlap to secure them.

6: Mount the stick and eraser together by digging holes in the eraser where you can insert the stick.

7. Then insert the large pin into the eraser to secure it.

8, windmill production is complete.