Installation instructions:
1, If a new computer or computer system can't start, you need to use another available computer to make a Chinese cabbage USB flash drive.
2. If the memory is 2G or less, install a 32-bit (x86) system; if the memory is 4G or more, install a 64-bit (x64) system.
Related reading:
How to install non-ghost system with Chinese cabbage
Efigpt mode USB flash drive starts to install win7 steps
Method for backup desktop data of C disk by pe when system crash.
I. Preparations
1, system download: USB flash drive version of win7 system download address.
2. 4G and above USB flash drives: How to make Chinese cabbage USB flash drive?
Second, the U disk startup settings: How to set the boot to start from the U disk?
Three, Chinese cabbage U disk installation steps are as follows
1, according to the above tutorial, make a Chinese cabbage U disk boot disk, and then copy the downloaded system iso file directly to the GHO directory of the U disk;
2. Insert the U disk of Chinese cabbage into the computer that needs to be installed. After restarting, keep pressing the shortcut keys such as F 12, F 1 1 and Esc to open the startup menu, select the U disk option and press Enter, such as GeneralUDisk5.00. For computers that do not support these startup keys, check the startup method of the U disk set in the second point.
3. Enter this interface after booting from the U disk, and select 02 option to enter through the direction key, or press the number key 2 directly to start the pe system. If you can't enter, select 03 old PE system;
4. After entering the pe system, friends who don't need to partition directly look at step 6. If you need to partition again, you need to back up all the data, then double-click to open the DG partition tool, right-click the hard disk, and select Quick Partition;
5. Set the number and size of partitions. Generally, drive C is recommended to be more than 35G. If it is a solid-state hard disk, check "Align partitions" to perform 4k alignment, and click OK to perform the hard disk partition process.
6. After the hard disk is partitioned, open the one-click installation of Chinese cabbage, and the image path selection system is iso mirrored. At this time, the gho file will be automatically extracted, and click the drop-down box to select the gho file;
7. Then click "Restore Partition" and select the installation location of the system, usually disk C. If disk C is not displayed, you can choose according to the "volume label" or disk size, and click OK;
8. At this time, a prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to perform the system restore process;
9. Go to this interface and perform the operation of restoring the system to drive C. This process takes about 5 minutes, so just wait patiently.
10. After the operation is completed, the computer will automatically restart. At this time, the USB flash drive can be pulled out or not, and then it will automatically restart to enter this interface to continue the system installation and system configuration process;
1 1, the whole installation process takes 5- 10 minutes, and finally restarts to enter the brand-new system desktop, and the installation process is completed.
The above is the whole process of how to install the system in Chinese cabbage. After making the U disk of Chinese cabbage, everyone will install the system for the computer according to this step.