Dehumidifying capacity is the most important parameter of a dehumidifier, and the general unit is liter/day (L/D) or liter/hour (L/H). For example, 20L/D means that the machine runs 24 hours a day and can pump 20L of water. This parameter is measured in standard environment, that is, when the ambient temperature is 30℃ and the humidity is 80%, there will be deviation in specific use.
After understanding the dehumidification capacity of different machines, we should choose the appropriate products according to the actual use area. Generally, dehumidifiers have a reference for the use area, and we can also estimate it according to the dehumidification amount of 0.6L per square meter per day.
When estimating the amount of dehumidification, it should be calculated according to the maximum usable area, that is, you should dehumidify the living room, bedroom and kitchen, count the sum of their areas, and then choose the appropriate amount of dehumidification.
Maintenance method of dehumidifier
1, Humidity maintenance method: When the dehumidifier is running, pay attention to carefully adjust the humidity to avoid overheating or supercooling. If the heating temperature is 2℃ lower, it can save electricity by about 10%. When the dehumidifier is running, try to open as few doors and windows as possible. Frequent opening and closing of doors and windows will reduce the refrigeration and dehumidification effect of dehumidifier and waste electric energy. Especially in summer, dehumidifiers can save about 5% electricity by blocking direct sunlight. In addition, because the sealed space is the most energy-saving.
2. Switch maintenance method: Do not switch the dehumidifier frequently when using it. It is best to control the switch on and off through the dehumidifier controller, and turn off the power supply when not in use.
When there is a sudden power failure during operation, although the dehumidifier can be started immediately, it will run for 3 minutes, so it is best to start it again after 3 minutes. Please pay special attention to the effective use of the timing function. When sleeping and going out, please use the timer function to make it run only during the necessary time to save electricity.