How to use the soymilk machine
1. Measure the ingredients
Before using soymilk to make soymilk, we need to completely soak soybeans or other beans, so that we can make soymilk more easily. Use a soymilk machine with a cup of dried beans to dry the beans according to the 2/3 ratio line and wash them with water. The soaking time is 8 to 16 hours in spring and autumn, 6 to 1 hours in summer and 1 to 16 hours in winter. If you want to speed up the soaking time, you can use warm water to shorten it by 2 to 3 hours.
2. Put ingredients
Add beans and rice into the cup. For the bean cup, take 2/3 of the rice, wash it with soaked beans and put it directly into the cup.
3. Add clean water
After putting the ingredients into the water, you can put them into the water. There is usually a water pipe in the cup. Add water to the top and bottom waterlines.
4. Grain refining facility
Take the place where the grinding device is installed in the direction indicated by the installation arrow, and the mouth device of the lower cover is installed to grind the grain smoothly. Pull it down a little by hand, and do not move the grinding device.
5. Make soybean milk
Put it in the right position on the main machine head of the cup. When the power cord is plugged in, the indicator light will light up. Press the soybean milk, and the corresponding indicator light will light up and the nutrition program will start the soybean milk. When soybean milk is hit, there will be a warning light or tone, and soybean milk will be ready.
6. After repeated beating and boiling completely agree with the established program, the electric heater and motor stop working, and the machine gives an audible and visual alarm, indicating that the soybean milk is ready. Unplug the power cord and you can drink it.
7. Cleaning Soymilk Machine
Soymilk should be cleaned in time after use, otherwise it will be difficult to clean after drying. Machine head: gently squeeze soybean milk or other things stuck to the bottom of the machine head. Do not immerse the nose in water or clean the top of the nose with water to prevent water and short circuit from entering. RedRafael: Clean the Rafael network carefully with a brush or cleaning block. Be sure to rinse it clean to avoid the smell of soybean milk. Electric heater: clean the electric heater with a cleaning block and wipe the film soybean milk or connect it to the electric heater to prevent the smell of the next use. Cup body: clean the inside of the cup with a cleaning block and rinse it with water. Storage: Store the equipment in a dry and ventilated place.
how to use a soymilk machine-which soymilk machine is good
Jiuyang soymilk machine
This soymilk machine is also a soymilk machine without soybeans, which saves the trouble of filtering grains. It is completely broken at the speed of 15, rpm, so soybean milk can be polished to get a better taste. Of course, Jiuyang DJ13B-D8D soybean milk can not only beat soybean milk, but also squeeze juice, etc. It has many functions and a stable background, and is naturally very popular with consumers.
Midea Soymilk Machine
If you want to know which one is good, Midea Soymilk Machine adopts the traditional soybean milk cooking method. There is an opening in the upper part. The three-stage aeration valve adopts large-scale conduction heat, which is beneficial to increase contact with outside air during pulping. Remove foam. In addition, you can continue to cook by heating, and the beans can be ground to a very fine level by a mill without slag, so the nutrition of soybean milk is completely preserved, which is worth starting!
That's the introduction of how to use the soymilk machine that we brought to you. Thank you for reading.