Introduction of electric mixer
The agitator is a liquid, gas medium forced convection and uniform mixing device. The type, size, speed, power and other parameters of the agitator have an important impact on the effect of media mixing and blending. Different mixing processes need to be realized by the operation of different mixing devices, in the design and selection of the first according to the purpose and requirements of the process on the mixing operation, to determine the type of agitator, motor power, mixing speed, and then select the speed reducer, frame, mixing shaft, shaft seal and other components.
Use of electric stirrer
Electric stirrer is suitable for biology, physical and chemical, cosmetics, health products, food, reagents and other experimental fields. It is the experimental equipment for liquid mixing and stirring. The product concept is novel in design, advanced in manufacturing process, with large torque output for low-speed operation and good performance for continuous use. The driving motor adopts the series-excited micro-motor with large power and compact structure, which is safe and reliable; the operation control adopts the numerical control touch-type stepless speed controller, which is convenient for speed regulation; the digital display shows the operation speed status, and the data collected is correct; the output force-boosting mechanism adopts the multi-stage non-metallic gears to transfer the force-boosting, which doubles the torque, and the operation status is stable and the noise is low; and the stirring rod special rolling head is simple and flexible for unloading and loading, and so on. It is the ideal equipment for scientific research, product development, quality control and production process in factories, scientific research institutes, colleges and universities, and medical units.
Use: Suitable for water supply and drainage projects in the mixing pool, reaction pool water and a variety of pharmaceutical mixing and reflecting the process of mixing.
Operation of electric mixer
The electric mixer adopts advanced permanent magnet DC motor, equipped with force increasing and speed regulating circuit, which has the features of increased torque at low speed, smooth speed, no noise, continuously adjustable speed, and can be used continuously for a long time. The stirring bar is made of high quality stainless steel, which is corrosion resistant and durable. The operation steps of the electric stirrer are as follows:
1. First, put the container to be stirred on the worktable, put the stirring rod into the reagent bottle, adjust the positioning nut to fix it, the motor can be adjusted back and forth up and down, and the main column and the crossbar have the supporting screws which can be loosened or tightened at will.
2. Turn on the power, open the power switch.
3. Rotate the speed knob to adjust the speed of the stirring bar.
4. Adjust clockwise to increase the speed; counterclockwise to decrease the speed.
If you need to control the time, rotate the timing knob to the corresponding scale position. If you don't need to control the time, turn the knob to "ON" position.
Precautions for electric mixer
1. The electric mixer should be kept dry.
2, the use of electric mixer must be grounded.
3, when working, if you find that the stirring rod is not concentric, stirring the phenomenon of instability, please turn off the power to adjust the support of the clamp, so that the stirring rod is concentric; medium-speed stirring can reduce vibration, prolong the service life.
4, ambient temperature: 0-50 ℃, no corrosive gases; relative humidity: 35%-85% (non-condensing).
5, please do not overload use.
6, in order to ensure the safety of use please service grounding wire.
7, fuse Φ5 × 2015A.
8, long-term use, please put in a dry place without corrosive gas storage.