If you want to cook with yuba, you should soak yuba in warm water at least two hours in advance. Because yuba is difficult to soak, if it is not soaked for enough time, it will be hard in many places when eating. Moreover, if it is forcibly soaked in hot water for a short time, it will also be uneven in hardness and hardness of all parts of yuba. Therefore, the beancurd hair must be soaked in warm water for a long time, so that it can be soft and hard and taste good. When the yuba is soaked, it may float on the water. At this time, use a plate to buckle the floating yuba, and then let the plate press the yuba into the water, so that the soaking effect is better.

How to soak yuba quickly? Method 2

1, when soaking yuba, soak it in warm water and add a little salt to the water, so that yuba will be easy to soak, and the hardness will be uniform, so that some places will not be soft and some places will be dry and hard. (My mother taught me this)

2. The dried yuba is very light. When it is soaked, there will always be a small part floating on the water surface. In some places, it can't be soaked. When it is soaked, cover it with a plate to let the yuba all soak in the water, so as to ensure that every place is soaked.

3. After basic soaking, cut into filaments and soak in warm water for 20 minutes, and the soaked yuba is quite perfect. ? How to soak yuba? Method 5

Generally, warm water is used to send yuba, and a few drops of white vinegar are added to the warm water to soak all yuba in the water. Of course, yuba will not stay in the water honestly, so it takes only 4-6 hours to press it with a large bowl or plate with a certain amount to keep all the water from yuba.

How to soak yuba? Method 6

First, fold the yuba into sections, as long as you think the length is appropriate. The bought yuba should be two pieces connected together and broken at the U-shaped joint of yuba, because it is the most difficult to soak there. Fold the yuba shorter, soak it in warm water for a short time for 2 or 3 minutes, then pinch the yuba soaked in water with your hands, just like squeezing water in a sponge, pinch it for a while, change some water and soak it for a while. It should be faster. That's how I soak every time.

How to soak yuba Method 7

Fast hair soaking method I soak my hair in a microwave oven, put the amount of water without dried beancurd in a container with a lid, and heat it on high fire for three to five minutes, depending on the amount of dried beancurd, it will be done quickly, which is very time-saving for office workers.

How to soak yuba quickly? Method 3

When soaking beancurd, it is best to soak it in cold water, so that the taste of beancurd will not be lost and the appearance will be neat and clean. However, it takes a long time to soak the yuba in cold water, usually 4 to 6 hours. If you are in a hurry, you can use warm water instead of cold water, and you can also make the yuba soak hard and soft, and the time can be shortened by half. Never soak yuba in boiling water, otherwise it will easily cause uneven hardness, or even rotten outside and hard inside.

How to soak yuba quickly? Method 4

It's also a good idea to soak the yuba in the microwave oven. Put the water without yuba in a covered container and heat it for three to five minutes on high fire. Depending on the amount of yuba, it will be ready soon, which is very time-saving for office workers!