How to decorate the gusset plate on the indoor wall?
1. Install the corner collection series according to the same level height. Hoist the light steel keel (38 or 50 keel) at an appropriate spacing, with a general spacing of1-1.2m, and the distance of suspenders shall be distributed according to the provisions of the light steel keel.
2. Put the hanging pieces pre-installed on the gusset plate keel, and fasten them under the light steel keel together with the gusset plate keel in a vertical direction with the light steel keel. The spacing between the gusset plate keels is generally 1 m, and the level must be adjusted after all the pieces are installed (generally, when the vertical distance between the building and the aluminum plate to be hoisted is less than 600MM, it is not necessary to add 38 keels or 50 keels in the middle, but use the keel hanging pieces to connect directly with the suspenders).
3. Buckle the gusset plates in parallel on the supporting keel in sequence, and connect the gusset plates with special keel series connectors. Gloves must be worn when installing the panel.
If fingerprints or stains are left carelessly, they can be wiped dry after being cleaned with detergent boiling water. Good installation process is convenient for disassembly. How to decorate the wall?
1: In general, the original wall surface needs to be cleaned for base treatment. Whether the base treatment is clean or not is the key link of the whole wall construction quality. The base with different materials should be treated in different ways, and the treated base wall surface should meet the requirements of smoothness, dryness, no oil pollution and no floating dust. Among them, if there are cracks or unevenness on the wall, it needs to be filled with gypsum, and the unevenness should not exceed 0.5 cm. It is the most basic condition to ensure that the wall is completely dry. Generally, it should be placed at 10 for more than 0 days. No matter what kind of wall paint is used, the wall surface must be flat, and the putty should be hung twice at least.
2. Generally, two layers of putty need to be scraped on the wall. The putty for the first time needs to be scraped horizontally, and the putty for the second time needs to be scraped vertically.
Putty needs to choose a putty with high fineness and hard texture, and a certain amount of white latex can also be added to the putty to improve the hardness of the putty. When scraping putty, it is required to scrape flat, even, smooth and dense. When scraping fully, don't miss scraping, and at the same time, leave no gaps in the joints, and don't defile the door and window frames and other parts. 3: Polishing is generally carried out after the wall putty is brushed.
Try to use finer sandpaper, and generally use 400-500 sandpaper for soft putty (such as 82 1). If the sandpaper is too thick, it will leave deep sand marks, which cannot be covered by painting. Because the polishing work is very heavy and important, the general construction period is about 2-3 days, so try to do it at one time to avoid the trouble of secondary construction. After polishing, the wall must be thoroughly cleaned, so as to avoid too much dust affecting the adhesion of the next wall paint, and the concave-convex gap should not exceed 3 mm. 4. Primer is an important decoration step before painting the top coat, so the primer must be brushed evenly to ensure that every part of the wall is brushed. If the wall is painted in a large amount, you can also add a proper amount of water to the primer to ensure that it can be painted evenly. In addition, just because it is a primer, you can use a roller that is almost the same. The brushing effect of the primer will directly affect the brushing effect of the topcoat.
Therefore, it is necessary to use a roller with the same texture as the top coat, so that the primer can be thoroughly brushed. 5. When painting the top coat, the coating film of the wall top coat should not be too thick or too thin, and it is easy to sag and wrinkle when it is too thick, which will affect the dryness and beauty; If it is too thin, it can't play the role of paint. You can't add too much water, which will affect the thickness, feel and hardness of the paint film. At the same time, choose tools with better texture. The hair of the roller should not be too short, but it must be slender, so that the painted paint film will feel delicate. When painting, you need to pay attention to the corner of the wall and other places that are not easy to brush.
6. The wall latex paint will dry 4 hours after brushing, but the dried paint film has not reached a certain hardness, so it should be properly cared for. So don't scrub or touch the wall for 7- 10 days, so as to ensure the smoothness and fineness of the wall paint.
The knowledge about how to decorate the gusset plate of the indoor wall and how to decorate the wall is simply introduced here. What I want to say is that when painting the top coat, the coating film of the top coat should not be too thick or too thin, and it is easy to sag and wrinkle if it is too thick, which will affect the dryness and beauty. I hope my introduction above can help everyone.