When it comes to how to distinguish the quality of drawer slide rails, it is generally introduced in detail from the aspects of bearing capacity, internal structure and drawer material. Let's take a look at the following introduction:

1, bearing capacity:

The quality of the slide rail directly affects the bearing capacity of the drawer. You can test the bearing capacity of the drawer by yourself by pulling the drawer out completely, pressing the outer edge of the front of the drawer by hand, and observing the forward tilt of the drawer from the side. The smaller the forward tilt, the stronger the carrying capacity of the drawer.

2. Internal structure:

Inside the slide rail is its bearing structure, which is directly related to its bearing capacity. At present, there are both steel ball slide rails and silicon wheel slide rails on the market. The steel ball slide rail automatically removes dust and dirt on the slide rail through the rolling of steel balls, which ensures the cleanliness of the slide rail and will not affect its sliding function because dirt enters the inside. At the same time, the steel balls can disperse the surrounding forces and ensure the stability of the drawer in the horizontal and vertical directions.

3, drawer material:

From the outside, the steel drawer is dark silver gray with delicate texture. Moreover, the side plate of the steel drawer is thicker than that of the aluminum drawer, and the color of the powder-sprayed steel drawer is lighter than that of the steel drawer, light silver gray, thinner than that of the steel drawer, but thicker than that of the aluminum drawer.

The above is a brief introduction about how to distinguish the drawer slide rail from the bad. I believe that after the above introduction, everyone will have a certain understanding of the quality appraisal of drawer slide rails. Of course, after selecting the high-quality drawer slide rail, the next step is installation. How to install the drawer slide rail? Let's take a look at the following introduction:

How to install the drawer slide rail:

First, the drawer slide rail installation steps:

1. First, decide what kind of drawer slide rail to use. Generally, three hidden slide rails are used. Please determine the length of your drawer and the depth of the counter according to certain data, so as to choose the corresponding size and install it on the drawer.

2. Secondly, assemble the five plates of the drawer, screw on the screws, put the drawer on the installed drawer after processing, so that the holes of the adjusting nails match, and then push the locking nails into the drawer and the slide rail.

3. Finally, when installing the cabinet, it is necessary to screw the plastic hole on the side plate of the cabinet first, and then install the track removed from it. A slide rail is fixed with two small screws one behind the other, and both sides of the cabinet should be installed and fixed. After the drawer slide rail is installed, align the two ends of the movable rail (inner rail) on both sides of the drawer side plate with the two ends of the fixed rail (middle rail), and then gently push it in, you will hear a slight click, indicating that the movable rail and the fixed rail have been linked, and the drawer can be pushed and pulled freely.

Second, the drawer slide rail installation considerations:

1, the first is the choice of size. Generally speaking, the length of the drawer slide rail should be the same as that of the drawer. If the slide rail is too short, the drawer can't open and close at maximum, and if it is too long, it can't be installed.

2. For the drawer slide rail, the installation is relatively simple, and the key lies in how to disassemble it. In some drawings on how to disassemble the drawer slide rail, there are detailed disassembly steps, which can be well disassembled, so if you want to install it, you can think backwards and restore it step by step, and then you will know how to install the drawer slide rail.