Please enter the name /CAS number/molecular formula /EINECS/MDL to obtain MSDS, physicochemical properties and other information.

search

Inquiring about the classification of chemical products by CAS number Organic raw materials carboxylic acid compounds and their derivatives carboxylic acid esters and their derivatives 2-ethylhexyl acrylate (2-EHA)

2-ethylhexyl acrylate (2-EHA)

Update time: 2022-01-120: 07:11

2-ethylhexyl acrylate (2-EHA) structural formula

2-ethylhexyl acrylate (2-EHA) structural formula

Common name 2-Ethylhexyl acrylate (2-eha) English name 2-ethyl acrylic.

CASNo.103-11-7 molecular weight184.275

Density 0.9 0.1g/cm3 boiling point 216.0 0 c at 760mmhg.

The molecular formula c11h20o2 melting point-90? C

MSDS

Chinese version

American edition

Flash point 79.4 0.0 C.

Symbol GHS07

GHS07 signal word Warning

Brand specification purity membership price operation

Ron 5ml 99.5% (analytical standard reagent) ￥190.00 ￥152.00 purchased.

Mclean 5ml analytical standard, ≥ 99.5% (GC) ￥ 220.00176.00.

Aladdin 5ml analytical standard ≥ 99.5% (GC) ￥ 227.00182.00.

* If you have other special requirements on price and specifications, please contact online customer service.

See all specifications >

Use of 2-ethylhexyl acrylate (2-EHA)

Used as polymerization monomer, soft polymer, and internal plasticization in * * * polymer.

Product nature

Literature review 33

collection of illustrative plates

2-ethylhexyl acrylate (2-EHA) name

Chinese name 2-ethylhexyl acrylate

English name 2-ethylhexyl acrylate

Chinese alias -2- ethylhexyl acrylate

More English aliases

Physical and chemical properties of 2-ethylhexyl acrylate (2-EHA)

Density 0.9 0.1g/cm3

Boiling point 216.0 0.0 c at 760mmhg.

Melting point-90? C

The molecular formula is c11h20o2.

Molecular weight184.275

Flash point 79.4 0.0 C.

Accurate mass184.146332

PSA 26.30000

LogP 4.33

Appearance characteristics colorless liquid

Steam density 6.4 (vs air)

The vapor pressure is 0.10.4 mmhg at 25 C.

Refractive index1.434

Storage conditions are stored in a cool and ventilated warehouse. Stay away from fire and heat sources. Keep away from light. The reservoir temperature should not exceed 30℃. Keep the container sealed, and it is forbidden to contact with air. It should be stored separately from oxidants, acids and alkalis, and should not be mixed. Equipped with corresponding varieties and quantities of fire fighting equipment. The storage area should be equipped with emergency treatment equipment for leakage and suitable accommodation materials. Storage temperature 2-8? C

stability

1. Light is easy to polymerize. Avoid contact with strong oxidants, strong acids and strong bases. Flammable, flammable when exposed to open fire and high heat.

2. It exists in mainstream smoke.

3. Sensitive to light, tears.

Water solubility <: 0. 1 g/ 100 mL at 22 ? C

molecular structure

1, molar refractive index: 54.46

2. Molar volume (cm3/mol): 209.0

3. Isotonic specific volume (90.2 k): 480.9

4. Surface tension (dyne/cm): 27.9

5. Dielectric constant:

6. Dipole distance (10-24cm3):

7. Polarization: 2 1.59

computational chemistry

1. Reference value for calculation of hydrophobic parameters (XlogP):3.8.

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 8

5. Number of tautomers: None

6. Polar surface area of topological molecules 26.3

7. Number of heavy atoms: 13

8. Surface charge: 0

9. Complexity: 152

10. Number of isotope atoms: 0

1 1. Determine the number of atomic stereocenters: 0.

12. Number of uncertain atomic stereocenters: 1

13. Determine the number of chemical bond stereocenters: 0.

14. Number of uncertain chemical bond stereocenters: 0.

15.*** Number of valence bond units: 1

more

1. Properties: colorless and transparent liquid, odorless and tasteless.

2. Density (g/ml, 20/4℃): 0.8845

3. Relative steam density (g/mL, air =1): 6.35.

4. Melting point (? C）：-90

5. Boiling point (? C）： 123~ 127（7998pa）

6. Refractive index (n20? C）： 1.4365

7. Viscosity (MPa s, 20? C）： 1.54

8. Flash point (open cup,? C）：86

9. Autoignition point or ignition temperature (? C）： 252

10. vapor pressure (mmHg,20? C）：0. 15

1 1. vapor pressure (kPa,20? C）：0.02

12. heat of vaporization (kj/mol): 47.0.

13. Upper explosion limit (%,v/v): 6.4.

14. Lower explosion limit (%,v/v): 0.9.

15. solubility: miscible with ethanol and ether, slightly soluble in water.

16. liquid standard hot melt (j mol-1k-1): 380.8.

2-ethylhexyl acrylate (2-EHA)MSDS

Part I: Names of Chemicals

Chemical Name: 2-ethylhexyl acrylate

English name of chemical: acrylic acid-2-ethyl hexyl ester; 2-Ethyl hexyl acrylate

Chinese common name or trade name:

Synonyms：

CAS No.： 103- 1 1-7

Molecular formula: c11h20o2.

Molecular weight:184.31

Part II: Composition/Composition Information

Pure chemical mixture

Chemical name: 2-ethylhexyl acrylate

Content of harmful substances, CAS No

2-ethylhexyl acrylate100103-11-7

The third part: risk overview.

Hazard category:

Invasion route: inhalation, ingestion and percutaneous absorption.

Health hazard: this product has irritating effect on skin and eyes. It belongs to low toxicity, but it will be poisoned if inhaled, ingested or absorbed through the skin. When it comes to heat, it explains the irritating smoke.

Environmental hazards:

Danger of explosion: this product is flammable and irritating.

Part IV: First aid measures

Skin contact: rinse thoroughly with soapy water and clean water. See a doctor.

Eye contact: Open eyelids and rinse with flowing water 15 minutes. See a doctor.

Inhalation: leave the site quickly and go to fresh air. Keep the respiratory tract unobstructed. If breathing is difficult, give oxygen. If breathing stops, give artificial respiration immediately. See a doctor.

Ingestion: If taken by mistake, drink proper amount of warm water to induce vomiting. See a doctor.

Part V: Fire Prevention Measures

Hazard characteristics: flammable in case of open flame and high heat. Contact with strong oxidant can lead to chemical reaction. Its vapor is heavier than air, which can spread to a considerable distance at a lower place, and will catch fire when it meets a fire source. It is easy to self-polymerize, and the polymerization reaction is rapidly intensified with the increase of temperature. In case of high heat, the internal pressure of the container increases, which is in danger of cracking and explosion.

Harmful combustion products: carbon monoxide and carbon dioxide.

Fire extinguishing methods and extinguishing agents: atomized water, anti-soluble foam, carbon dioxide, dry powder.

Personal protection of firefighters: Firefighters must wear gas masks and full-body fire suits to put out fires in the upwind direction.

Prohibited fire extinguishing agent:

Flash point (℃): 75.80

Autoignition temperature (℃): 252

Lower explosion limit [%(v/v)]: 0.8

Upper explosion limit [%(v/v)]: 6.4

Minimum ignition energy (mJ):

Deflagration point:

Detonation velocity:

Maximum explosion pressure (MPa):

Classification of building codes and fire risks:

Part VI: Emergency Treatment of Leakage

Emergency treatment: Evacuate the personnel in the leaked contaminated area to a safe area, and prohibit irrelevant personnel from entering the contaminated area. It is recommended that emergency treatment personnel wear self-contained breathing apparatus and chemical protective clothing. Mixed with sand, dry lime or soda ash, collected in a closed container and transported to the waste disposal site. It can also be scrubbed with emulsion made of incombustible dispersant. If a large amount of leakage occurs, it will be contained by the dike, and then it will be collected, transferred, recycled or discarded after harmless treatment.

Part VII: Operation, Disposal and Storage

Precautions for operation: closed operation, local exhaust. Prevent steam from leaking into the air in the workplace. Operators must be specially trained and strictly abide by the operating procedures. Operators are advised to wear self-priming filter gas mask (half mask), chemical safety glasses, anti-static work clothes and rubber gloves. Stay away from kindling and heat sources, and smoking is strictly prohibited in the workplace. Use explosion-proof ventilation system and equipment. Welding, cutting and other operations cannot be carried out before removing liquid and vapor. Avoid producing smoke. Avoid contact with oxidants, acids and alkalis. The container and transmission equipment should be grounded to prevent static electricity. When filling, the flow rate should be controlled, and a grounding device should be provided to prevent static electricity accumulation. Equipped with corresponding varieties and quantities of fire fighting equipment and leakage emergency treatment equipment. Empty containers may leave harmful substances.

Precautions for storage: Store in a cool and ventilated warehouse. Stay away from fire and heat sources. Keep away from light. The reservoir temperature should not exceed 30℃. Keep the container sealed, and it is forbidden to contact with air. It should be stored separately from oxidants, acids and alkalis, and should not be mixed. Equipped with corresponding varieties and quantities of fire fighting equipment. The storage area should be equipped with emergency treatment equipment for leakage and suitable accommodation materials.

Part VIII: Contact Control/Personal Protection

Maximum allowable concentration: China MAC: the former Soviet Union MAC: the United States TLV—TWA: the standard has not been formulated.

Monitoring method:

Engineering control: the production process is sealed and ventilation is strengthened.

Respiratory system protection: When the concentration in the air exceeds the standard, you must wear a self-priming filter gas mask (half mask). Air respirator should be worn during emergency rescue or evacuation.

Eye protection: Wear safety glasses.

Physical protection: wear anti-static work clothes.

Hand protection: wear rubber gloves.

Other protection: Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Pay attention to personal hygiene.

Part IX: Physical and chemical characteristics

Appearance and properties: colorless liquid.

pH：

Melting point (℃):-90

Boiling point (℃): 215-219.

Relative density (water =1): 0.8869 (20℃)

Relative vapor density (air =1): 6.35.

Saturated vapor pressure (kpa): 0.02/20℃

Heat of combustion (kJ/mol):

Critical temperature (℃):

Critical pressure (MPa):

Logarithmic value of octanol/water partition coefficient:

Flash point (℃): 75.80

Ignition temperature (℃): 252

Upper explosion limit% (v/v): 6.4

Lower explosive limit% (v/v): 0.8

Molecular formula: c11h20o2.

Molecular weight:184.31

Evaporation rate:

Stickiness:

Solubility: Insoluble in water, soluble in most organic solvents.

Main uses: used for manufacturing coatings, adhesives, fiber and fabric modification, processing AIDS, leather processing AIDS, etc.

Part X: Stability and reactivity

Stability: unstable at normal temperature and pressure.

Prohibited compounds: strong oxidant, strong acid and strong alkali.

Conditions to avoid contact: light is easy to polymerize.

Aggregation hazard: it can happen

Decomposition products: carbon monoxide and carbon dioxide.

Part XI: Toxicological Data

Acute toxicity: LD 50: 5600 mg/kg (by mouth in rats); 7539 mg/kg (rabbit percutaneous) LC50: No data available.

Acute poisoning:

Chronic poisoning:

Subacute and chronic toxicity:

Irritation: rabbit percutaneous: 20mg/24 hours, moderate irritation. Percutaneous rabbit: open stimulation test, 500mg, mild stimulation. Rabbit eye: 5mg, severely stimulated. Rabbit eye: 500mg/24 hours, mild irritation.

Sensitization:

Mutagenicity:

Teratogenicity:

Carcinogenicity:

Part XII: Ecological data

Eco-toxicological toxicity:

Biodegradability:

Non-biodegradable:

Bioaccumulation or bioaccumulation:

Part XIII: Abandonment and Disposal

Waste nature:

Disposal method of waste: it is suggested to dispose by controlled incineration or safe burial. If possible, reuse containers or bury them in specified places.

Precautions for abandonment:

Part XIV: Transportation Information

Dangerous goods number:

UN number:

Packaging mark:

Packaging category:

Packing method: No data available.

Precautions for transportation: check whether the packaging container is complete and sealed before transportation, and ensure that the container does not leak, collapse, fall or be damaged during transportation. It is strictly prohibited to mix with oxidants, acids, alkalis and edible chemicals. Transport vehicles and boats must be thoroughly cleaned and disinfected, otherwise other items may not be shipped. When shipping, the assembly position should be far away from the bedroom and kitchen, and isolated from the engine room, power supply, fire source and other parts. Highway transportation should follow the prescribed route.

RETCS number:

IMDG rule page number:

Part XV: Regulatory Information

Domestic chemical safety management regulations: Regulations on the safety management of hazardous chemicals (promulgated in the State Council on February 17, 1987), detailed rules for the implementation of the regulations on the safety management of hazardous chemicals (Hua Lao Fa [1992] No.677), and regulations on the safe use of chemicals in the workplace ([1996]).

International regulations on chemical safety management:

Part XVI: Other Information

References:1.Zhou Guotai, Encyclopedia of Safety Technology for Hazardous Chemicals, Chemical Industry Press, 1997 2. Toxic Chemicals Management Office of State Environmental Protection Bureau, Beijing Institute of Chemical Technology, Environmental Data Manual of Chemical Toxicity Regulations, China Environmental Science Press.1992 3. Canadian Centre for Occupying Health and Safety, Cheminfo Database.1998 4. Canadian Centre for Occupying Health and Safety, rtecs Database,1989.

Time to fill in the form: year month day.

Filling department:

Data audit unit:

Revision description:

Other information: 5

MSDS Revision Date: Year Month Day

Toxicity and ecology of 2-ethylhexyl acrylate (2-EHA)

Toxicological data of 2-ethylhexyl acrylate (2-EHA):

1, irritation: rabbit percutaneous: 20mg/24h, moderate irritation. Percutaneous rabbit: open stimulation test, 500mg, mild stimulation. Rabbit eye: 5mg, severely stimulated. Rabbit eye: 500mg/24 hours, mild irritation.

2. Acute toxicity: oral LD 50: 5600 mg/kg in rats; Rabbit percutaneous LD50: 7539 mg/kg

3. Irritating to eyes, respiratory system and skin.

Ecological data of 2-ethylhexyl acrylate (2-EHA);

This substance is slightly harmful to water.

Toxicity of 2-ethylhexyl acrylate (2-EHA)

2-ethylhexyl acrylate (2-EHA) safety information

Symbol GHS07

GHS07

Signal word Warning

Hazard statement H315-H317-h335-H412

Warning statement p273-p280-p304+p340+P312-p333+P313.

Personal protective equipment Eyeshields; Faceshields; full-face respirator (US); Gloves; multi-purpose combination respirator cartridge (US); type ABEK (EN 14387) respirator filter

Hazard code (Europe) Xi:Irritant

Risk statement (Europe) R37/38; R43

Safety Statement (Europe) S36/37-S46

Dangerous goods transport code UN3334 9

WGK Germany1

RTECS number AT0855000

Customs code 29161290

2-ethylhexyl acrylate (2-EHA) composite line < Previous 1/2 Next >

2-ethyl hexanol structural formula

2-ethyl hexanol

104-76-7

Acrolein structural formula

acrolein

107-02-8

~%

2-ethylhexyl acrylate (2-EHA) structural formula

2-ethylhexyl acrylate (2-EHA)

103- 1 1-7

Literature: US2003/2 16587 A 1,; Page/Page column 3-4 ;

2-ethyl hexanol structural formula

2-ethyl hexanol

104-76-7

Acrylic structural formula

acrylic acid

79- 10-7

~%

2-ethylhexyl acrylate (2-EHA) structural formula

2-ethylhexyl acrylate (2-EHA)

103- 1 1-7

Literature: US29 17538;

Unregistered structural formula

Not logged in

500790-28-3

~%

2-ethylhexyl acrylate (2-EHA) structural formula

2-ethylhexyl acrylate (2-EHA)

103- 1 1-7

Literature: Journal of the American Chemical Society, vol.67, p.57.

2-ethylhexyl acrylate (2-EHA) upstream and downstream products

2-ethylhexyl acrylate (2-EHA) upstream product 5 <: Previous 1/2 Next >

2-ethyl hexanol structural formula CASNo. 104-76-7.

2-ethyl hexanol

Acrolein structural formula CASNo. 107-02-8

acrolein

Acrylic acid structural formula CAS No.79-10-7

acrylic acid

Acetylene structural formula CAS No.74-86-2

acetylene

2-ethylhexyl acrylate (2-EHA) downstream products 5 <: Previous 1/2 Next >

Octyl p-methoxycinnamate structural formula CAS No.5466-77-3

Octyl p-methoxycinnamate

2-ethylhexyl 3-(4-Bromophenyl) sulfinylpropionate structural formula CAS No.881664-08-0

2-ethylhexyl 3- ...

Propanolic acid, 2-ethylhexilester structural formula CAS No.6293-37-4.

Propanoic acid, ...

4-oxo-heptanedioic acid bis-(2-ethyl-hexylester) structural formula CAS No.81733-97-3.

4-oxo-heptanedi ...

Preparation of 2-ethylhexyl acrylate (2-EHA)

1. Acrylic acid and 2-ethyl hexanol were esterified by direct esterification with sulfuric acid as catalyst, then neutralized, dealcoholized and rectified to obtain the finished product.

103- 1 1-7 preparation

2. Ester exchange method Methyl acrylate and 2-ethyl hexanol undergo ester exchange reaction in the presence of titanium tetrachloride as a catalyst to generate 2- ethylhexyl acrylate, and the finished product is obtained by rectification.

3. Methyl acrylate and 2- ethyl ethanolamine were mixed according to the molar ratio of 3∶ 1 (mol ratio), and the gas phase transesterification reaction was carried out at 227 ~ 228℃. The conversion rate was 32% and the yield was 97%. When the transesterification reaction was carried out in liquid phase, the yield was 70% ~ 80%.

4. Add a certain amount of acrylic acid, isooctanol, catalyst (SO42-/ZrO _ 2) and inhibitor phenothiazine into the reaction kettle, and heat and reflux until there is no water to separate out. The reaction liquid was washed with alkali and water until neutral, and then distilled under reduced pressure, and the product was collected. The amount of catalyst is 5% of the mass of acrylic acid, the amount of polymerization inhibitor is 0.05% of the mass of acrylic acid, the ratio of raw materials (isooctanol) to acrylic acid =1.2:1,the reaction temperature 120℃ and the reaction time is 3h.

2-ethylhexyl acrylate (2-EHA) Customs

Customs code 2916129000

2916129000 Other acrylates. VAT rate: 17.0% Tax rebate rate: 9.0% Regulatory conditions: no MFN tariff: 6.5% General tariff: 30.0%.

The name, content and purpose of the declared elements, and the packaging of acrylic acid, acrylate or ester shall be stated.

Summary 29 16 129000 other esters of acrylic acid VAT: 17.0% Tax rebate rate:9.0% Supervision conditions:none MFN tariff:6.5% General tariff:30.0%

2-ethylhexyl acrylate (2-EHA) Literature 33 More Literature

Development and application of a non-targeted extraction method for the analysis of migrating compounds from plastic baby bottles by GC-MS.

Food Addit. Contam. Part A. Chem. Anal. Control. Expo. Risk Assess. 3 1( 12) , 2090- 102, (20 14)

In 20 1 1, the European Union prohibited the production of polycarbonate (PC) baby bottles due to the toxic effects of the PC monomer bisphenol-A. Therefore, baby bottles made of alternative materials, ...

details

Prediction of the reduced glutathione (GSH) reactivity of dental methacrylate monomers using NMR spectra - Relationship between toxicity and GSH reactivity.

Dent. Mater. J. 28(6) , 722-9, (2009)

It has been established that the toxicity of acrylate and methacrylate monomers is driven by their reactivity towards glutathione (GSH) . With this relationship, the objective of this study was to pred ...

details

The potential dermal irritating effect of residual (meth)acrylic monomers in pressure sensitive adhesive tapes.

Drug Chem. Toxicol. 33( 1) , 1-7, (20 10)

It is generally thought that residual unpolymerized (meth) acrylic monomers commonly found in pressure sensitive adhesive tapes for medical use may cause dermal irritation, but a systematic study has n ...

details

English alias of 2-ethylhexyl acrylate (2-EHA)

ETHOXY-2-ETHYLACRYLATE

2-Ethyl- 1-hexyl acrylate

Acrylic Acid 2-Ethylhexyl Ester Monomer

UNII-HR49R9S6XG

2-Propenoic acid, 2-ethylhexyl ester

2-ethylhexyl propenoate

2-ethyl

2-Ethylhexanol acrylate

2-ethyl-hexyl acrylate

MFCD00009495

2-Ethyl hexyl acrylate

acrylic acid, 2-ethylhexyl ester

Octyl Acrylate Monomer

ethylhexyl acrylate

2-Ethylhexyl acrylate (2-EHA)

Mono(2-ethylhexyl) acrylate

2-ethylhexyl prop-2-enoate

2-ETHYLEXYL ACRYLATE

EINECS 203-080-7

Acrylic Acid Octyl Ester Monomer

OCTYL ACRYLATE

2-Propenoic acid 2-ethylhexyl ester

acrylic acid 2-ethylhexyl ester

2-EHA

ETHYL-2-HEXYLACRYLATE

1-Hexanol, 2-ethyl-, acrylate

2-ethvlhexvlacrvlate

O-2-ethylhexyl acrylate

2-ethylheksyl acrylate

2-Ethylhexyl Acrylate Monomer

EHA

Brand spot direct purchase

Related compounds: more ...

2 ethylhexyl acrylate

29590-42-9

Polymer of 2- 2-ethylhexyl acrylate and 2- acrylamide

50922-82-2

2- 2-ethylhexyl acrylate, polymer with N-( 1, 1,3,3- tetramethylbutyl) -2- acrylamide.

70069-8 1-7

2- cyano -3,3- diphenyl 2-ethylhexyl acrylate

6 197-30-4

Polymer of 2- 2-ethylhexyl acrylate and Acrylic Acid

90 17-68-9

iso octyl methacrylate

28675-80- 1

3- Phenyl 2-ethylhexyl acrylate

16397-78-7

α-cyano 2-ethylhexyl acrylate

184765-00-2

* * * polymer of acrylic acid, 2-ethylhexyl acrylate and vinyl acetate.

6625 1-44-3

Recommended supplier:

Nantong runfeng petroleum chemical co., ltd

Chongchuan District, Nantong City, Jiangsu Province

Product name: 2-ethylhexyl acrylate

Purity: 99.5%

Lead time: 1 day

Contact: Cao Haibing

Tel: 176254398 17

Shanghai jizhi biochemical technology co., ltd

Fengxian District, Shanghai, Shanghai

Product name: 2-ethylhexyl acrylate

Purity: 99.0%

Lead time: need to inquire

Contact: Wang Xiaoyan

Tel: 189 17409608

Wuhan Fengtai Weiyuan technology co., ltd

Hongshan District, Wuhan city, Hubei province

Product name: 2-ethylhexyl acrylate

Purity: 98.0%

Lead time: need to inquire

Contact: Miss Yang

Tel:18971372418.

Shanghai chuangsai technology co., ltd

Jiading District, Shanghai, Shanghai

Product name: [Perfemiker] 2-ethylhexyl acrylate, > 99.0%(GC), containing MEHQ stabilizer.

Purity: 99.0%

Lead time: 1 day

Contact: Lingdu

Tel: 17302 163957

Shanghai Aladdin Biochemical Technology Co., Ltd.

Shanghai Pudong New Area, Shanghai

Product name: 2-ethylhexyl acrylate (2-EHA)

Purity: 99.0%

Lead time: 1 day

Contact: Aladdin

Tel:18521732815.

Zhongshan dixin chemical co., ltd

Sanjiao Town, Zhongshan City, Guangdong Province

Product name: 2-ethylhexyl acrylate

Purity: 99.0%

Lead time: 3 days

Contact: Wang Jie

Tel: 18933390325

Shandong jinyueyuan new material co., ltd

Tianqiao district, Ji 'nan City, Shandong Province

Product name: (iso-) octyl acrylate

Purity: 99.5%

Lead time: 3 days

Contact: Wang Sibing

Tel:18615186228

Ji' nan century Tongda chemical co., ltd

Tianqiao district, Ji 'nan City, Shandong Province

Product name: 2-ethylhexyl acrylate

Purity: 99.5%

Lead time: 1 day

Contact: Manager Wang

Tel: 1509895 1629

To view all suppliers and prices, please click:

2-ethylhexyl acrylate (2-EHA) manufacturer

2-ethylhexyl acrylate (2-EHA) price

2-ethylhexyl acrylate (2-EHA) Huayuan. com provides 2-ethylhexyl acrylate (2-EHA)CASNo.103-1-7, 2-ethylhexyl acrylate (2-EHA)MSDS and its description, properties, English name, manufacturer, function/use, molecular weight, density. It is professional and easy to query 2-ethylhexyl acrylate (2-EHA) Shanghua Source Network with CAS number. > > Mobile MIP version: 2-ethylhexyl acrylate (2-EHA)

Title: 2-ethylhexyl acrylate (2-EHA)_MSDS_ use _ density _CASNo.103-1-7 _ Huayuan network address:/CAS/103-/kloc-0.

Extreme Mobile Edition (MIP)

Copyright ? 2022 ChemSrc All Rights Reserved