Estar AR-Y4118 mechanical rice cooker disassembly method:

Step 1: Use a Phillips screwdriver to remove the bottom screws, the base generally have 3-4 screws, under the trademark.

The second step: with a smaller one screwdriver inserted into Figure 1 marked 1 position, slowly bending open, bending open can see the buckle shown in the figure below, a **** 7 buckles, all bending open after the base can be removed

The third step: to remove the power socket, with a good bit of a one screwdriver from the small holes shown in the figure below, make a strong skimmed off the power socket to remove it.

Step 4: Remove the base completely

Continue disassembling

Step 5: Remove the water cup at position 3 in Figure 1, remove the screws behind the water cup, and remove the small tray that holds the water cup

Step 6: Bend off the position 4 in Figure 1 with a screwdriver, and then bending it off along the cooker in a circle, the heating part of the cooker and the outer shell can be separated, as follows

Step 6: Bend off the position 4 in Figure 1 with a screwdriver.

Step 7: Loosen the ground screw at the position 2 shown in Figure 1

Step 8: Remove the heating and heat preservation control part

The rice cooker is completely disassembled.