The folding method of Jin Yuanbao is as follows:

Method 1:

1. First prepare a square piece of origami paper, fold it in half, then fold it in half in the opposite direction, and then Fold back the two corners.

2. Fold the two folded corners into an isosceles triangle shape, fold it in half and then fold it inward.

3. Make some final adjustments to the details, and the ingots will be stacked.

Method 2:

1. First prepare a rectangular origami.

2. Fold both sides of the origami paper diagonally in opposite directions.

3. Turn the paper over and fold it in half.

4. Fold one corner inward and tuck the sharp corner into the paper.

5. Turn over and do the same on the other side.

6. Then open the origami.

7. The simple gold ingot origami is completed.

Method 3:

1. Prepare a piece of tin foil paper with a length-to-width ratio of 3:2.

2. Fold the tin foil paper in half along the long side, making sure that the silver side is on the outside.

3. Fold the folded edge upward by about one-third.

4. Open the upper opening downwards and keep the folded part as it is.

5. Fold the larger part below so that the edge is flush with the bottom of the folded part.

6. Fold the two corners of the silver part inwards.

7. The two corners of the yellow part below should also be folded inward.

8. Fold the yellow part upward along the dividing line with the silver part, hold it in your hand, and open the fold.

9. Spread its two sides outwards appropriately so that the inner part can be held up.

10. Arrange the outer edges a little, and a Yuanbao will be folded.