Meat grinder operating procedures (1) before use to clean all parts of the washable parts (refer to the instructions for use). (2) After assembling and energizing the machine, wait until the machine operates normally, then add the meat. (3) Before grinding the meat, please bone the meat and cut it into small pieces (thin strips) to avoid damaging the machine. (4) Turn on the machine and wait for normal operation before adding meat. (5) Add meat must be even, not too much, so as not to affect the motor damage, if you find that the machine is not running normally, you should immediately cut off the power supply, shut down the machine and check the cause. (6) If you find leakage, ignition and other faults, you should immediately cut off the power supply, find an electrician to repair, do not open the machine for repair. (7) Turn off the power after use. Then clean the parts, drain the water and put it in a dry place for spare. (8) Before use, refer to the instruction manual requirements. If you don't use it strictly according to the operation regulations, you will be responsible for the consequences of the problems. The operating procedures of the pasta machine (1) before use, clean the pasta machine, put the flour and water, do not overdo it so as not to damage the machine, such as the need for and more noodles, need to be divided into 2 or more times to stir. After putting the flour and water, close the gear plate and then turn on the electricity. (2) When mixing the noodles, take the positive and negative directions to mix in order to make the noodles and even. (3) If the mixing is uneven or dirty, you need to adjust or remove the noodles by hand, you must turn off the power and stop the machine first. (4) After mixing, turn off the power, stop the machine and take the noodles. Clean up the residue every time. (Normally, you can put a small amount of noodle head in the trough, but you must clean it out thoroughly on Saturdays, Sundays and holidays). (5) Do not make thin noodles in the pasta machine to prevent corrosion of the machine. (6) If you find any faults such as leakage of electricity, you should cut off the power and stop the machine immediately, and look for an electrician to repair it, and you should not open the machine for repairing. (7) Before use, refer to the instruction manual. Do not use in strict accordance with the operating procedures, the consequences of problems.