How should I stick the wall stickers?
Check the wall quality
Before sticking the wall, the wall must be kept clean and flat, and secondly, the water absorption and pH of the wall should be moderate. If the wall has been painted before, it will dry for at least half a month.
How should I stick the wall stickers?
Do a good job of grounding protection.
In order to keep the ground clean when pasting the wall, you should protect the ground. For example, spreading a layer of plastic film on the floor can not only prevent the glue from polluting the floor, but also protect the floor.
How should I stick the wall stickers?
Measure size
Measure the size of the wall that needs wallpaper, and calculate the amount of wallpaper.
Paper-cut wallpaper
When cutting wallpaper, the length of each cut should be greater than the length of the wall. Generally, just add 10 cm. Secondly, the rest of the cut wallpaper can be used for later repair, which can save consumption. If there are beams on a large area of the wall, then there is no need to paste wallpaper, so the effect will be better.
Softening of wallpaper adhesive
After gluing the back of the wall sticker, fold it in half and soften it for a while. But when you paste it, you should stick a protective tape, so that when you fold it in half, the surface of the wallpaper will not get glue.
Wallpaper paving
Some auxiliary tools can be applied to the wall stickers to make the paving effect more beautiful. Secondly, pay attention to the time when paving. If it takes too long, it will dry, and it will not tear off after it is paved and corrected.
Wallpaper trimming and cleaning
If there are overlapping parts, pay attention to the alignment of the patterns, and the overlapping parts should be separated. In addition, if there is a part of the wire switch panel, we must pay special attention to the pavement, and the glue scraped on the panel should be wiped clean with a sponge immediately.
There are many kinds of materials used in wall decoration, such as paint, wallpaper and so on. Among them, wallpaper is not only convenient for construction, but also has many styles for people to choose from. It is an environmentally friendly material, so it is favored by consumers. The above is the relevant content of Bian Xiao's sorting out the skills of purchasing easy-bear wallpaper and how to paste it. I hope the content of the article can help everyone.
What should I pay attention to in wall stickers?
1. It is necessary to measure the indoor humidity before pasting wallpaper. Generally speaking, the humidity suitable for wallpaper is below 85% to achieve the best effect. If the construction is carried out in rainy season or the wall is too wet, the impact is very great.
2. Before pasting wallpaper, the wall foundation needs to be treated. First of all, check whether there are cracks, bubbles and warpage on the wall. Problems should be dealt with in time. Then it is to clean up the grassroots as a whole, without residual impurities or dust.
3. In order to get the best effect of wallpaper, you can brush a layer of polyester paint on the wall base first, and then paste the wallpaper. The function of polyester paint is to prevent the wallpaper from becoming moldy after being damp, and effectively improve the service life of wallpaper.
4. In the process of pasting wallpaper, there will be adhesive overflowing from the wallpaper, which needs to be cleaned in time with a towel, especially the traces at the seams of the wallpaper, so as not to affect the overall appearance.
Wallpaper is very popular in the decoration now, because the decorative effect of wall stickers is very good and the construction is very convenient and fast, which is very popular with people. In the paper, Bian Xiao sorted out how to paste the wall stickers and what related contents should be paid attention to. I hope the content of the article can help everyone.