Methods/Steps

1/6

To adjust four to two, you must first focus on the lead to find the bottom. The lead skin rolled up by the lead pendant is greater than the buoyancy force, which is heavy lead. Put the line group into the water, and the lead pendant will fall to the bottom of the water. At this time, the float has not entered the water. Move the float upward repeatedly until the float is 1 eye above the water. (The distance between the lead falling to the top of the float is the distance from the water surface to the bottom)

2/6

Adjust the adjustment. The float moves downward (the distance is roughly 5-10 cm longer than the length of the sub-line). At this time, the float is submerged in the water again, and the lead pendant still falls to the bottom.

3/6

Slowly cut the lead sheet and put it into the water several times to observe the float. When the float shows 4 meshes, complete the adjustment. At this time, the lead pendant is suspended and the double ditch is separated from the bottom.

4/6

Adjust the fishing purpose. Hang the bait on the bottom hook (you can also hang a piece of rubber). At this time, the gravity of the bait is greater than the buoyancy of the float. The float is submerged into the water again, the bottom hook just touches the bottom, and the upper hook is suspended.

5/6

Slowly move the float upward. When the float leaks 2-3 mesh, the bottom hook still touches the bottom and the upper hook is suspended.

6/6

Hang up both ears and observe the effect of the float on the double bait. It will sink 1 mesh, the bottom hook touches the bottom, and the upper hook floats or touches the bottom. At this time, you can Complete the adjustment of fishing purpose. In this way, the float adjustment is completed.