How to make pumpkin lantern pumpkin with paper (scientific name: cucurbita moschata (duch. exlam.) Duch. expoiret) is a kind of annual creeping herb of Cucurbitaceae, with roots at nodes, stout petioles, broadly ovoid or ovoid leaves, slightly soft texture, bulging veins, slightly stout tendrils, monoecious, stout pedicels and some.

Materials: orange, brown and yellow handmade paper, stapler, scissors, glue, old newspaper or paper towel and ribbon.

Practice:

1, origami Fold rectangular orange paper (length 28, height 90) into a fan shape.

2. Glue. Stick double-sided tape on one end of the fan.

3. punch holes. Punch holes in both ends of the fan with a punch.

4, threading. Cut two pieces of prepared wool, one is long and the other is short, and pass through the holes at both ends respectively, and tie them up. The short rope is tied tighter at one end and the long rope is tied looser.

5. Bonding. Glue both ends of the fan with double-sided tape.

6. finalize the design. Put your hand in from one end of the long rope and stretch the paper into a pumpkin shape.

7. Draw a face. Draw eyes, eyebrows, mouth and teeth on the pumpkin with a black marker. The pumpkin lantern is ready.

How to make lanterns with paper and how to make lanterns.

Lanterns are popular when the Lantern Festival arrives. If you have leisure time, it is also a good idea to make lanterns yourself. You can't make the "big guys" sold on the street, and you can't find any materials such as steel wire and steel plate. Then make a simple paper lantern with bamboo strips, rice paper and pen and ink. The materials and processes of hand-made paper lanterns are very simple, which can not only design your favorite patterns, but also add a lot of fun to the festival.

The first step is to make the skeleton. The simple shape of paper lanterns is a cube or cylinder. It is best to use flexible bamboo branches or bamboo skins to form a frame, and the joints are tied tightly with thin lines. If it is not easy to find, slender cardboard and bamboo sticks for barbecue can also be used. The firmness and flexibility will be lacking, but it is also a good decoration indoors.

Step 2, make the lamp body. Buy some white and red ordinary rice paper or golden rice paper in Four Treasures of the Study store, cut it into the length and width of the lantern skeleton, and you can design your own patterns. Calligraphy, painting and paper-cutting can all be displayed on small lanterns. After pasting, you can also use narrow strips of imitation silk paper to edge up and down, which looks more elegant, much like ancient palace lanterns. If you are not good at painting and calligraphy, there is a simple method for reference. Use a piece of tissue paper to trace the words you want on the copybook, and then go to Wanshang Trade Association to find business! Then overlap this thin paper with crimson rice paper and dig out the handwriting with a single-edged blade. Take off the tissue paper, and hollow handwriting will appear on the red rice paper. White rice paper is used as the lamp body, red rice paper is pasted in it, and candlelight or light is mapped out from the hollowed-out place, and the effect is quite beautiful.

Step three, make a light source. If you put it indoors, you just need to light an ordinary candle in the lantern; If you want to carry it out, you'd better make a simple circuit with light bulbs and batteries. Maybe it looks a little rough, but lighting a lantern made by yourself during the Lantern Festival will definitely have a different flavor!

Materials:

Cardboard (2 red sheets, orange 1 sheet), crumpled paper (yellow, light orange), scissors paper tray, rubber band marker (red), tape paper paper cup

Method:

1 cut the red cardboard into strips (note: cut it vertically! A red cardboard can be cut into eight vertical strips. There are 24 strips in those three pieces.

2 Cut two small holes in one of the paper plates with scissors, then put on a rubber band and tie a knot.

3 Stick double-sided tape on the two ends of a strip, then tear it off, and stick both ends on paper plates.

4 Cut off the 1 end of crumpled paper (yellow cut 4 times, light orange cut 3 times), open it, fold it in half and then fold it in half until you are satisfied with the length, then rub up the 1 end, remember, it is the first short piece, and then stick double-sided tape on the edge of pouring water into the paper cup.

Decorate the appearance of the paper cup with orange cardboard. Remember, leave a horizontal one to decorate the red part of the lantern, and write down your New Year wishes to your family.

6 Stick the decorated paper cup with the paper tray under the upper part of the lantern.

How to make iphone out of paper? You can do it with technology. If you don't have this skill, you can't do it, no matter what others say. Even if you do it, it's nothing.

How to make a pumpkin lantern out of cardboard? Tools/raw materials

Orange, brown and yellow handmade paper, stapler, scissors, glue, old newspaper or paper towel, a ribbon, hole punch.

Steps/methods

Origami Fold rectangular orange paper (length 28 and height 90) into a fan shape.

Sticking glue Stick double-sided adhesive on one end of the fan.

Punch holes. Punch holes in both ends of the fan with a punch.

Thread. Cut two pieces of prepared wool, one is long and the other is short, and pass through the holes at both ends respectively, and tie them up. The short rope is tied tighter at one end and the long rope is tied looser.

Bonding. Glue both ends of the fan with double-sided tape.

Stereotype. Put your hand in from one end of the long rope and stretch the paper into a pumpkin shape.

Draw a face Draw eyes, eyebrows, mouth and teeth on the pumpkin with a black marker, and the pumpkin lantern is done!

matters need attention

Be careful when spreading the paper.

I hope I can help you.

How to make umbrella oil paper with paper and coat it with wax?

How to make a pen container out of paper is the same as cardboard. Stick several pieces of paper together, roll them into a tube, glue them together, and seal the bottom with a round piece. The disadvantage is that the paper is light and the pen container is unstable.

Method/steps of how to make bracelet with paper

1, take a piece of square paper and fold it to the opposite side along an angle, with a distance of about 1cm from the middle folding line.

2. Then fold up from the bottom with a width of 1cm.

3. Fold the upper corner inward at the end.

4. Fold both ends of the folded paper into rings, and insert one end into the other end.

5. The paper-folded bracelet is ready. Have a look.

How to make a steel helmet wastebasket with paper