1. Prepare the materials as shown in the figure.
2. First, cut off the round edges at both ends of six popsicle sticks, all of which are the same length.
3. Cut into two short popsicle sticks according to the width, and then glue and fix them.
4. The wooden board beside the carriage is also glued and fixed, and then the first half of the two pull rods are cut into circles and thin.
5. Fix the fuel filler first, and then insert it into the wheelchair.
6. Find the position of the oil filler for the pull rods on both sides, and dig the groove.
7. Bonding and fixing.
8. Finally, the horse needs to be fixed with some ropes, and the production is completed.