Current location - Recipe Complete Network - Pregnant women's recipes - Why are there no MSR metal ejection receivers for sale?
Why are there no MSR metal ejection receivers for sale?

No, there are only soft-shell guns. Secondly, if you sell MSR metal ejection receivers, it may have been illegal.

MSR sniper rifles adopt a modular design. All parts of the gun are installed on a corrosion-resistant all-aluminum alloy base, and the base itself already includes the magazine socket, firing base, etc., so the corresponding parts can be installed. The advantage of this is that different parts can be changed to suit different battlefield tasks.

As for the barrel, it uses a free-floating barrel, which is fixed on the receiver through a large steel barrel sleeve. There are longitudinal long grooves on the outer surface. This design can be used in It reduces weight while maintaining very good rigidity. It is also equipped with grooves, which can improve the heat dissipation efficiency. Together with the design of a free-floating barrel that does not contact the front stock, this sniper rifle can have better accuracy. The barrel is also very easy to disassemble. It usually only takes a few minutes to replace the barrel and use it to fire bullets of different calibers. The barrel of the Remington MSR sniper rifle has an accurate lifespan of more than 2,500 rounds. The muzzle of the barrel is equipped with a flame arrester/muzzle brake from Advanced Weapons and Equipment Company. This flame arrester can reduce recoil and lower the muzzle. The magnitude of the increase and so on, so its practicality is still very good.

As for the design of the receiver, the receiver is made of titanium alloy material. There is a magazine mouth under the receiver, and a detachable magazine is used to feed ammunition. Unlike previous sniper rifles, It uses a fixed magazine design, and the magazine can use a single row or a double row magazine, and its ammunition capacity is also different. According to different types of ammunition, there are 5, 7 or 10 rounds of ammunition to choose from. Therefore, it can quickly provide a large amount of firepower output.

There are a large number of heat dissipation holes on the front of the gun stock, which can quickly cool the barrel, and a unique tactical accessory wire management system is reserved inside, so other accessories can be installed. Related parts. And there is a question here. In this case, why not just remove the butt and let the barrel be directly exposed to the air? Doesn't it dissipate heat faster this way?

Another reason why the front butt is installed here is to reduce the heat generated by the barrel and heat the air around the barrel, which then forms rising hot air. As you can see by looking at the ground, hot air rises. It will cause the image to generate torque, which is similar to the mirage principle, and will have a relatively large impact on the judgment of the target.

In addition, the rear stock of this sniper rifle can be folded, which many sniper rifles can do, and there is a MIL on the top of the receiver and the top of the front stock. -STD-1913 tactical rail. This rail can be used to install day/night optical sniper scopes and other auxiliary aiming devices. In addition, it also reserves connection points for installing other relatively high-end optical or electronic devices. Therefore, it is The scalability is very good. Of course, the entire Remington MSR sniper rifle is detachable, so it can be disassembled and carried in the provided hard carrying case