1, the first phase of Wuhan Metro Line 4 passes through the site:
Wuhan Railway Station, Meiyuan Community, Zhongnan Road, Hongshan Square, Chuhe Han Street, Qingyuzui, Dongting, Yuejiazui, Tieji Road, Luojiagang, Huayuan Road, Renhe Road, Yegongsi Road, Yangchun Lake and Wuhan Railway Station.
2. Wuhan Metro Line 4 Phase II Access Station:
Shouyi Road, Fuxing Road, Lanjiang Road, Zhongjiacun, Hanyang Railway Station, Wulidun, Qilimiao, Shilipu, Wangjiawan, Yulong Road, Yongantang, Mengjiapu and Huangjinkou.
3. Wuhan Metro Line 4 (Caidian Line) Phase III Route Station:
Xintian, Jixian, Yin Zhi, Nong Xin, Fenghuang Road, Caidian Square, Linzhang Avenue, Miaoxin Village and Berlin.
Vehicle facilities of this line:
The vehicles used in the first phase of Wuhan Metro Line 4 are Type B vehicles produced by Zhuzhou Vehicle Factory of China CSR Group. A total of 90 cars were ordered. 6 cars are grouped, with a total of 15 trains. Each train is planned to carry more than 2000 passengers. The plan is designed for the initial average daily passenger traffic of Line 4 of 220,000 passengers. After the second phase of the line is opened in the future, hybrid models will be added.
Compared with the metro vehicles of Wuhan Metro 1 Line, the above-mentioned vehicles are further optimized in design: in order to reduce the noise inside the vehicle, a noise reduction ring is installed on the vehicle, which can reduce the noise by about 10 dB.
The vehicles used in the second phase of Wuhan Metro Line 4 are manufactured by CNR Changchun Rail Bus Co., Ltd., and the cumulative order is 144 vehicles. Each train is 2.8 meters wide and 3.8 meters high. The length of the train is about118m. Each train carries about 1440 passengers, with a maximum capacity of about 2,000 passengers and a maximum running speed of 80 kilometers per hour. Compared with the first stage of the train, these basic parameters have not changed much.