Salt spray corrosion tester (YWX imported) YWX salt spray corrosion tester (imported), this series of products for the artificial simulation of marine climate salt spray corrosion test equipment, electrical equipment, metal materials, products of all kinds of material surface treatment, including coatings, electroplating, inorganic and organic film, anodic treatment, anti-corrosion treatment, such as anti-corrosive rust oil, accelerated corrosive properties of the changes in the test. It is also one of the artificial climate environment "three-proof" (hot and humid, salt spray, mold) test equipment, is the study of machinery, national defense industry, light industry, electronics, instrumentation and other industries, a variety of environmental adaptation and reliability of an important test equipment, but also to do the vinegar salt spray test

Detailed

Salt spray corrosion tester (YWX imported type)

Salt spray corrosion tester ( YWX imported)

YWX salt spray corrosion tester (imported)

Main technical parameters

Satisfy the national standard GB2423.17 "electrical and electronic products environmental testing Test Ka: salt spray test method" and IEC68-2-11 "Basic Environmental Test Procedure, Part II: Test, Test Ka: Salt Spray" and ISO9227 "artificial simulated climate corrosion test - salt spray test" and other standards to carry out the relevant salt spray test. The test chamber in line with national standards GB10587 "salt spray test chamber technical conditions" design and production implementation.

Structural features

The inner and outer shells are made of imported PVC rigid plastic plate, corrosion-resistant, aging-resistant, smooth and gorgeous surface.

The test chamber adopts water-tight structure, and the lid is made of imported transparent PVC hard plastic plate, so that the condition of the specimen and the spraying state can be seen at any time.

Configuration of non-crystallized glass nozzle (quartz glass production), to remove the worry of salt blockage.4. Spray system adopts tower spraying, distribution uniformity, fine mist particles, natural settlement and adjustable

Gap, continuous spraying time can be adjusted.

The control system adopts high-precision PID temperature control instrument, error ± 0.1 ℃. Domestic table (standard), optional Japan Fuji, Ricoh RKC. double pressure adjustment, unique air pressure lever, panel operation switch box cover easily

With a lack of water, over-temperature, lack of phase multiple safety protection devices

Working Principle

The compressed air through the nozzle on its way to the bubble tower and be wet, the nozzle will be corrosive solution and air atomized into a corrosive aerosol, the box is a corrosive aerosol. The nozzles atomize the corrosive solution and air into a corrosive aerosol, and a heater inside the chamber maintains the temperature of the chamber.

The main technical parameters of the equipment

Model (YWX) 010 025 075 100 200

Test box size (cm) 50 × 50 × 40 55 × 90 × 60 75 × 110 × 60 100 × 130 × 60 100 × 200 × 80

Technology

Parameters Temperature range RT +10～55℃

Temperature uniformity ≤±2℃

Temperature fluctuation ≤±0.5℃

Salt spray sedimentation rate 1～2ml/80cm2h

Saturated air pressure 0.8～2±0.01kg/cm2

Temperature of test chamber Salt water test method: 35±1℃/Corrosion resistance test method: 50±1℃

Air drum temperature Salt water test method: 47±1℃/Corrosion resistance test method: 63±1℃

Test chamber volume 100L 250L 500L 1000L 2000L

Charge water drum volume 15L 25L 40L 40L 40L

Electricity 220V?50HZ/(380V?50HZ three-phase four-wire system)

The test chamber temperature is 0.8~2±0.01kg/cm2

Test chamber temperature: 35±1℃/Corrosion resistance test method: 50±1℃

Test room temperature (380V?50HZ three-phase four-wire system)