Gift packaging method (1)-the basic tying method of bow

Nothing, even if there is no wrapping paper, no box, is not packed in a bag. As long as you tie a ribbon, it will become a gift at an incredible moment. If you wear a beautiful bow, it will immediately add charm to the gift itself.

How to tie a bow:

1. Tie a knot at both ends of the ribbon.

2. Hold the middle position with your hand and bend the silk on the right irregularly into a circle.

3. Fold the ribbon on the left side from the top and press it with the thumb of the right hand.

4. Pass through the right ribbon loop, and then pass through the loop formed by the left ribbon.

5. The original ribbon circle on the right is placed on the left, and the ribbon that passes through the circle formed by the left ribbon is tightened on the right.

6. Trim both ends of the ribbon into the desired shape, and the bow is finished.

Gift Packaging Method (2)-The Method of Bowing

This is a double-sided bow tie method:

1. Tie the ribbon horizontally with the front facing outwards.

2. Fold the right side to petal size.

The petals folded on the left are longer than those on the right.

4. Cross left and right as shown in the figure, leaving a hole in the middle.

5. The long side passes through the hole.

6. Arrange the left and right sides in the same size

7. Cut the ribbon into the appropriate length according to the size of the bow, and it is finished.

Gift Packaging Method (3)-Basic Cross Ribbon Tie Method

This is the most basic ribbon tying method. When the position of the cross changes, the feelings expressed by the gift will also change. You can put ribbons on cards or small items to make changes and experience the fun in the base. The cross-shaped ribbon is simple and can set off the taste of the gift itself.

Cross system method

1. Prepare a ribbon, the length of which is 4 times of the total length+width+height of the box, which is the necessary length for bowing.

2. Leave the necessary bow length first, and then make a vertical circle.

3. Turn it to the middle, cross the two ribbons, and then turn it horizontally.

4. As shown in the figure, cross the original ribbon.

5. Tie the ribbon into a knot from below, and then tie it.

6. In this way, a simple and beautiful bow is tied.

Gift Packaging Method (4)- Basic Double Diagonal Ribbon Tie Method

This is a very attractive ribbon tying method, which can show the taste of the giver. Except for the simple cross.

Double diagonal system method

1. Prepare a ribbon, the length of which is 3 times of the total length+width+height of the box. Leave enough length to bow.

2. Tilt the ribbon as shown.

3. Pay attention to put the diagonal ribbon in parallel and then roll it up.

4. Pass the left ribbon under the right ribbon.

Tie a beautiful bow.

6. In this way, the front and the back form two parallel diagonal bands.

Gift Packaging Method (5)- Basic V-Ribbon Tie Method

V-shaped system gives people a very beautiful, clear and elegant feeling. When giving gifts to people, men or elders who love beauty, it will achieve a surprise effect.

V system

1. Prepare a ribbon, the length of which is 4 times of the total length+width+height of the box.

2. Leave the necessary length to make a bow, and wrap it vertically and diagonally as shown in the figure.

3. Winding another diagonal line along the longitudinal direction.

4. As shown in the figure, first pass the ribbon on the left and fix it.

Bend the ribbon into a circle from below and tie a knot, and the beautiful V-shaped knot is finished.

Gift Packaging Method (6)- Basic Square Sugar Packaging Method

Square sugar packaging method for square articles

1. Cut the wrapping paper so that the length around the box is +2 ~ 3cm and the width is +3cm, and the bottom of the box is placed in the center of the paper.

2. Fold the right paper inward along the box and keep the edge of the paper in the center of the box.

3. Fold the left paper inward again.

4. Fix the overlapping parts of the paper with transparent adhesive or double-sided adhesive.

5. The paper on both sides is folded inward along the box.

6. Fold the paper into a beautiful trapezoid in sequence.

7. Gently mark the joint of the upper and lower origami.

8. Keep the mark parallel to the edge and fold the paper under it.

9. Fix the joint with double-sided tape or beautiful sticker, then wrap the other side, turn it over and put it in front of the box, and decorate it with ribbons or flowers.

Gift Packaging Method (7)-Thin Gift Box with Basic Inclined Packaging Method

This is one of the most basic packaging methods. Wrap the gift box with a certain angle of paper, and the corners can be wrapped beautifully in order. It will be very easy to wrap gifts after proficiency. It is very useful to master this method.

Inclined packaging method of thin gift box

1. Prepare the paper, as shown in the figure, and fold the paper inward along the edge of the box so that the corner of the paper is above the lid.

2. Then fold the paper at the back to the front to make sure it can cover the whole box. If the conditions of 1 and 2 cannot be met, the paper size does not meet the requirements.

3. Hold down the top corner, fold the paper on the left side, and collect the excess paper inside.

4. Fix the upper folding angle and the left folding angle with adhesive tape, fold the paper behind or slowly lift the box.

5. Turn the box upside down when sorting out the extra paper.

6. The paper on the right can be folded inward like the paper on the left, while keeping the folding vertical.

7. The rest of the paper should be folded inward and sorted out.

8. Finally, fold the extra corner inward, fix it with double-sided tape, and then tie a ribbon on the box.

Gift Packaging Method (8) —— Thick Gift Box with Basic Inclined Packaging Method

In order to prevent the box from tilting, it is convenient to pack the box in this way.

Packaging method of thick gift box

1. Prepare the paper. First, as shown in the figure, turn the front of the box outward and fold the paper in front to cover the three corners.

2. Secondly, as shown in the figure, fold the outer paper at the same position to confirm whether all three corners are covered, and the conditions of 1 and 2 must be met.

3. Wrap the box with the paper in front of you and stick the folding line tightly on the left and right corners of the box. After finishing the corners, fix them with adhesive tape.

4. Press and hold the position shown in the figure, and then put the box and wrapping paper down outside.

5. Lift the paper on the right side, fold it near the corner of the box, then fold it outward near the corner of the box like the left side, tidy up the corner of the box and fix it with adhesive tape. Fold the excess paper inside and pack the front.

6. The paper on the lower right side is folded inward to form a neat folding line, close to the corner of the box, and the paper erected on the outer side cannot be exposed to both sides. Fix it with tape, and then tidy the front.

7. Fold the outer paper to one side of the box, fold the excess paper inward along the edge of the box, and fix the edge with adhesive tape.

8. Turn the box upside down, pack it, tie a ribbon or decorate it.

Gift packaging method (9)-Spring double bow packaging method.

This season, you can open the window and let the fresh wind blow in. How about inviting friends to have a buffet at home? You can prepare some lovely gifts, such as cupcakes and flowers, black tea with ribbons on the jar, etc. This kind of packaging is suitable for more casual gifts.

Key points: tie a bouquet bow for the gift, and the double bow gives people a luxurious feeling.

1. First, tie a knot. While holding down the knot, pull up the ribbon on the left with your right hand. Tie another knot, but the second one won't tie well.

2. Overlap the two ribbons and wrap them around the left hand. Then, pass the two ribbons through the middle of the two knots, open the two ribbons and wrap them around a circle slightly smaller than the left hand.

3. Use the left loop to tighten and tidy the shape.

This method is suitable for handmade cakes and dishes. In order to see the real thing, the transparent cellophane bag will have a manual texture. Whether it is a gift or a gift, with this small gift, it will make meeting more enjoyable.

Gift Packaging Method (10) —— A refreshing cylindrical gift packaging method

This is a somewhat tricky packaging method. The folds concentrated in the middle can add elegance to the gift. After mastering it, no matter how big it is, it can be applied. I hope to create a cool atmosphere in summer through gifts, so the wrapping paper should be a combination of blue and white. Simple and refreshing ribbons can also be very emotional when packaging wedding gifts.

Point: In order to make the round folds look more beautiful, you must have patterned wrapping paper. In the cylindrical packaging method, the wrapping paper should not be too prominent, but the decorative effect of the threaded belt should be used to achieve the perfect effect.

1. Prepare the improvement document as shown in the figure.

2. Wrap the paper on the cylinder and fix it at the overlap with adhesive tape.

3. Fold the paper to the center of the circle, so you can make beautiful wrinkles.

4. Fold the excess paper inward at the folded part.

5. Fix it gently in the center with adhesive tape, cut it into a circle with paper of the same material, stick double-sided tape inside, and then stick it in the center. The other side is tied with a ribbon in the same way.

Gift Packaging Method (XI) —— A meaningful packaging method

Autumn is the harvest season. If you are surrounded by fruit and good wine, how about putting it in a bamboo basket as a gift? It is the most convenient way to give gifts by combining various items with bamboo baskets, and it can also improve the taste of gifts. It is also suitable for bride gift combination and baby gift combination.

Important: Please choose a ribbon that matches the size of the bamboo basket. Articles put in bamboo baskets. It can be wrapped with 1~2 ribbon, which will make the appearance more beautiful. When delivering meals, the red ribbon can reflect the sweet feeling, and a greeting card with coordinated colors is the icing on the cake.

Method for tying bow in bamboo basket

1. Tie a bow with the hand holding the bamboo basket, prepare a long ribbon, roll it on the handle holding the bamboo basket, and tie a beautiful bow.

2. Simple and convenient, and the creative packaging is completed.

3. Put the articles in and see if they fit. Select 1~2 important items and tie ribbons.

Gift packaging method (12)- spherical bow bow is indispensable for beautiful packaging. By changing the position of the bow, you can see a completely different effect. By changing the size and material of the bow, you can experience different moods. On the packaging of Christmas gifts, you can attach greeting cards and match them with gadgets to convey your feelings.

Here's how to tie the bow:

1. Wrap the ribbon with the length of 1.5m into a circle with the diameter of 10cm, and repeat for 5-6 times.

2. Hold the central part tightly

3. Press the middle part with your fingers, as shown in the figure, and trim the angle with scissors.

4. Overlap the cut parts in the middle for alignment.

5. Tie the middle part with 10 cm ribbon prepared at home and abroad.

6. Draw the ribbon from the inside out, from the inside out, and turn out all the ribbons on it alternately from left to right.

7. Pull out the ribbon below in the same way, and then arrange a spherical bow at the beginning to complete it.

8. Decorate the gift box with bows.

Gift Packaging Method (XIII)-French Bow

What is indispensable for beautiful packaging is a bow. By changing the position of the bow, you can see a completely different effect. By changing the size and material of the bow, you can experience different moods. On the packaging of Christmas gifts, you can attach greeting cards and match them with gadgets to convey your feelings.

Here's how to play the bow:

1. Prepare a ribbon with a length of 20 cm, fold one end of the ribbon 1 m into a circle with a length of 10 cm, and make a circle around it.

2. Overlap circles alternately up and down.

3. Go around more than three times

Put a 20 cm ribbon under it.

5. Wrap the glass fiber in the middle of the circle.

6. It's over