Finding the bottom is an essential step, you can not go to the surface of the water to determine the depth of a random half-water to adjust the drift, that will be very inaccurate to do drifting. The way to find the bottom is to wrap more lead skin on the lead seat to be able to pull the float into the water. The main point is to find the bottom with the float at a lower mesh, the advantage of this is to ensure that the water line is vertical. If you are looking for the bottom with a higher mesh, the waterline will tend to be tilted.

Step 2: Adjust four eyes

After finding the bottom, pull down the float seat about 1.5-2 times the length of the subline. The advantage of doing so is that it is close to the actual depth of the water in half-water drifting, or called half-water depth close to the depth of the water, which makes the drifting more accurate. Especially if you are using a thicker mainline, it is more important that the half water depth is close to the water depth. Trimming the lead skin to 4 eyes of the floating surface, trimming the lead skin is a delicate work, can not be in a hurry to slowly trimming, when the floating sinking speed becomes slower, then pay attention to each time to reduce only a trace of silk, to prevent cutting more.

The third step is to weigh the bait

The third step is to weigh the bait, this step is necessary, weighing the bait is to determine the fishing aim. For example, if you hang up a double bait and the float shows 2 eyes on the surface of the water, it means that the weight of the double bait is 2 eyes, and if you are fishing on the bottom, the fishing eye must be slightly larger than 2 eyes to ensure that the fishing group touches the bottom. Therefore, the fishing aim is not arbitrary to determine, for example, the use of earthworm fishing, have to adjust four fishing two, due to the weight of the bait is less than 2 mesh, which is not established, it is impossible to fishing 2 mesh such a situation. If you want to adjust four fishing two, double bait weight should be greater than or equal to 2 eyes, otherwise it is not valid.

The fourth step: fishing two eyes

The following is to determine the fishing eyes, also known as the precise bottom, the main point lies in the use of bait to find the bottom, the above roughly described bait weight on the drifting effect. For example, if the weight of the bait is 2 eyes, and the bottom is a little more than 2 eyes, the bottom bait is in the end, and the top bait is not in the end. If the weight of the bait reaches 4 eyes or even more, then fishing 2 eyes is the case of both baits to the bottom. So accurate bottom finding is not recommended to use weights, or will use weights hanging on the lower hook, bottom finding after hanging double bait accurate correction.

Step 5: Finding the mouth

We are fishing for 2 eyes, one bait to the bottom and one bait not to the bottom, this state of affairs is suitable for the day's fish conditions, this is unknown. So this fishing 2 eyes, called preset fishing eyes, the final fishing a few eyes or according to the fish conditions to determine. When the drift is clear and the fish is caught by lifting the rod, this is called finding the mouth. At this time may be the bottom of the bait lying on the bottom of the top bait bottom state, the specific state of which is nothing more than the spirit of blunt adjustment. If you have a lot of empty rods, increase the number of fishing eyes to fish blunt. The first thing you need to do is to get a good deal on the price of the product, and you'll be able to get a good deal on the price of the product.

Sixth step: fine-tuning

The reason for fine-tuning is that the fishing group will more or less take on water, and changes in the weight of the fishing group will lead to changes in the adjusting eye and the fishing eye, which will also affect the situation of the mouth of the fish. For example, if we start fishing 2 eyes, one bait touching the bottom and one bait suspended, the hit rate is not working, we fish 3 eyes, one bait lying on the bottom and one bait touching the bottom the hit rate is the highest, we end up tuning four and fishing three. When the fishing group draught becomes heavy, the original tuning four eyes may become the tuning 2 eyes, originally fishing three eyes, will be because of the fishing group draught into no eyes. Adjustment and fishing changes, but also affect the double bait in the bottom of the state effect, resulting in changes in the rate of fish, so after fishing for a while half-water state to see the adjustment, re-trimming the lead skin to 4 eyes, so that the drift is more accurate. After fine-tuning, you can fish all day long with peace of mind.