1, we need to put the machine in a very stable place, and connect the 220v power supply. After the indicator lights on the eyes and chest of the machine flash for a few seconds, if there is no abnormality, we can start the next work.
2. Check whether the control button on the left side of the robot is abnormal, and then start the blue button of the machine so that the right arm is in the highest position.
3. After taking down the panel of the machine, knead the dough that has been alive into a crescent shape and then put it on the panel, so that the panel and the dough are very tightly stuck together, and then put it on the left and right pallets of the robot after being positioned.
4. At this time, press the green button of the machine, and the machine has entered the state of noodle cutting. When the distance between the knife edge and the dough is around 1Cm, the robot will stop noodle cutting, and the cutter will slowly rise. At this time, you can't touch any button. After the right arm of the machine returns to the position set by the program, you can work in the next round of Daoxiao Noodles.