1, 3 are incoming wires, and 2, 4, 5 and 6 are motor wires. If there is any reverse or forward rotation, just exchange 5 and 6.

Matters needing attention in the use of dough mixer:

1. Before use, thoroughly check whether there are obstacles in all rotating parts of the machine, fill lubricating oil in all lubricating parts, and clean the dough bucket.

2. Debugging: Turn on the power supply, and pay attention to whether the rotation direction of the machine is consistent with the arrow direction.

3. Turn on the power supply: After the machine runs normally, the yeast and flour can be added into the flour mixing barrel and stirred (the amount of water can be determined according to the dosage). After mixing evenly, turn the dough barrel 90 degrees and take out the dough (hands are not allowed to be put in the dough barrel when the machine is working).

4. After the work, clean the machine once, cover the barrel cover, ensure food hygiene, and add lubricating oil to facilitate the next use.

5. When the dough mixer is running, it is forbidden to put hands and sundries into the bucket.

6. When operating, the operator must dress neatly to prevent clothes, aprons and sleeves from getting involved in the bucket.

7. Lesbians with long hair can't operate the dough mixer.

8. When you need to put your hands in the bucket for operation, be sure to unplug the main power switch, just in case.

9. When the dough mixer fails, it must be stopped immediately, and it is not allowed to touch it without permission. It can only be used if it is repaired.

10. When unloading or after use, you must first unplug the main power switch.