Current location - Recipe Complete Network - Complete vegetarian recipes - What should I do if there is offset printing on the tile after tearing?
What should I do if there is offset printing on the tile after tearing?
1. Soap with a little mixture of ammonia and turpentine can remove a lot of dirt and make the glass surface more shiny (this article is suitable for tiles, ceramics, glass, refrigerators, etc. ).

2. Some surfaces can be removed by repeatedly sticking and tearing with transparent adhesive.

3. Wipe it off with a little sodium chloride, or use paint thinner.

You can blow dry with a hair dryer, and then just scrape it gently.

5. Wipe with a cotton swab dipped in nail polish remover.

6, wind oil fine rub.

7. Wipe with special cleaner or sports shoes decontamination cream.

8. You can erase it with 4b eraser for painting, which is a very soft Korean eraser.

9. If the trace left by time becomes hard, you can soften it with a hot towel first and try again.

10, use "STP universal foam cleaner" and spray it as white as new. You must be satisfied! (This thing is available in the auto shop, a bottle of 80 yuan or so)