Cut into pieces and juice directly without adding water! Question: Will it take a long time? Answer: 1. Corn juice/peanut milk: This function is used to make corn juice or peanut milk. 1, put the mug on the base and make sure that it is in place, otherwise the machine will not work. 2. Put the filter screen into the big cup and rotate it clockwise, and press the two convex points at the lower edge into the two button positions at the bottom of the big cup to fix it. 3. Refer to the scale line on the big cup, and inject an appropriate amount of water into the big cup, which should not be lower than the minimum scale (800ml) or higher than the maximum scale (1500ml). If it is below the minimum scale, it can't be started, and you will hear a buzzer alarm. 4. Cover the cup lid and rotate it clockwise to fasten it into the large cup. 5. Use a proper amount of corn kernels (peanuts) in a cup and pour them into the strainer in a large cup. Note: When pouring corn kernels (peanuts) into the strainer, it is recommended to pour them from the hole in the center of the cup cover to avoid corn kernels (peanuts) leaking out of the strainer. 6. Install the measuring cup, align the two protrusions of the measuring cup with the corresponding grooves on the top cover, and then turn it clockwise until it is completely buckled into the cup cover. 7. Plug in the power supply. 8. Touch the "corn kernels/peanut milk" key, the indicator light will light up and the machine will start working. 9. After the work is finished, put the cup under the faucet, press the faucet button, and pour the corn juice (peanut milk) into the cup to enjoy. 10, turn off the tap and cut off the power supply. Second, the soybean milk key This function is used to directly make soybean milk 1 from soybeans, and put the large cup on the machine base, and make sure to put it in place, otherwise the machine will not work. 2. Put the filter screen into the big cup and rotate it clockwise, and press the two convex points at the lower edge into the two button positions at the bottom of the big cup to fix it. 3. Refer to the scale line on the big cup, and inject an appropriate amount of water into the big cup, which should not be lower than the minimum scale (800ml) or higher than the maximum scale (1500ml). If it is below the minimum scale, it can't be started, and you will hear a buzzer alarm. Note: When making soybean milk, the best ratio of water to dried beans is12:1.It is recommended to use one and a half cups or two and a half cups of soybeans (one cup is about 50g) each time. 4. Cover the cup lid and rotate it clockwise to fasten it into the large cup. 5. Use a proper amount of soybeans in a cup and pour them into the strainer in a large cup. Note: When pouring soybeans into the filter screen, it is recommended to pour them from the hole in the center of the cup cover to prevent the soybeans from leaking out of the filter screen. 6. Install the measuring cup, align the two protrusions of the measuring cup with the corresponding grooves on the top cover, and then turn it clockwise until it is completely buckled into the cup cover. 7. Plug in the power supply. 8. Touch the "Soymilk" key, the indicator light will light up and the machine will start working. 9. After the work is finished, put the cup under the faucet, press the faucet button, and pour the soybean milk into the cup to enjoy. 10, turn off the tap and cut off the power supply. Third, the juice button This function is suitable for mixing juice. 1, put the mug on the base and make sure that it is in place, otherwise the machine will not work. 2. After peeling, coring or other treatments, cut the fruits, vegetables and other items to be stirred into small pieces, put them into a large cup (without a strainer), and put an appropriate amount of water on it. The amount of food should not exceed the maximum scale line on the large cup. Note: Do not stir the boiling water or other liquid, and do not idle. 3. Cover the cup lid and rotate it clockwise to fasten it into the large cup. 4. Install the measuring cup, align the two protrusions of the measuring cup with the corresponding grooves on the top cover, and then turn it clockwise until it is completely buckled into the cup cover. 5. Plug in the power supply. 6. Touch the "Juice" key, the indicator light will light up and the machine will start working. Note: In this working state, the machine works for 1 min, the indicator light goes out, and the mixing is completed. If continuous stirring is required, it is necessary to stop for 2 minutes and then press the "juice" key or press other keys and then press the "juice" key. 7. After the work is finished, put the cup under the faucet, press the faucet button, and pour the juice into the cup to enjoy. 8. Turn off the faucet and cut off the power supply. Fourth, the boiling water button Press this button to apply to boiling water. 1, put the mug on the base and make sure that it is in place, otherwise the machine will not work. 2. According to the scale line on the mug, inject an appropriate amount of water into the mug, which should not be lower than the minimum scale (800ml) or higher than the maximum scale (1500ml). 3. Cover the cup lid and rotate it clockwise to fasten it into the large cup. 4. Install the measuring cup, align the two protrusions of the measuring cup with the corresponding grooves on the top cover, and then turn it clockwise until it is completely buckled into the cup cover. 5. Plug in the power supply. 6. Touch the "Boiling Water" key, the indicator light will light up and the machine will start to work. 7. After the work is finished, put the cup under the faucet, press the faucet button, and pour boiling water into the cup for drinking. 8. Turn off the faucet and cut off the power supply. Caution: Before first use: Before using this product for the first time, clean the mug, faucet and upper cover. Do not wash these parts in the dishwasher. The blade is very sharp, so be sure to handle it carefully. Before assembling or removing accessories, be sure to remove the plug from the power socket to avoid accidents. The main machine with a large cup should not be immersed in water or other liquids for cleaning. Note: Do not use pure water (pure water does not conduct electricity) when using this machine, and the water level in the large cup must not be lower than the minimum water level, otherwise this machine will not work; Nor should it be higher than the maximum water level, so as to avoid overflow during work.