AB glue is another name for two kinds of liquid mixed hardening glue. One liquid is this glue, and the other liquid is a hardener. Only when two liquids are mixed can they become hard. It does not need to be hardened by temperature.

Therefore, it is a room-temperature hardening glue, sometimes used for modeling. Can bond ceramics, plastics and plastics, plastics and metals, and metals and metals.

After bonding, peeling requires cutting tools or hot melt separation. The bonding effect between plastics is good, almost equivalent to the strength of ABS, and it is widely used for manual improvement.

Extended data:

Matters needing attention when using ab glue:

1. The workshop and the instruments used must be kept clean, otherwise the quality and bonding effect of glue will be affected, especially the oil stain and dust will affect the transparency and adhesion of glue drops. The indoor humidity should not be too high. Try to keep ventilation or have an exhaust fan. People should wear slippers or shoe covers when walking. When the indoor air is too turbid, a small amount of water droplets can be sprinkled on the ground.

2. Try to keep the room temperature at 25℃ in the glue dripping workshop, which has a great influence on the available time and curing time of glue. In addition, when turning on the air conditioner, it should be noted that the water mist at the air outlet directly falls on the surface of the adhesive layer and reacts with component B, resulting in white mist, oil stain and particles.

3. The glue dropping workbench should be as smooth as possible to avoid glue flowing, glue exposure, improper glue dropping and uneven glue dropping. You can use a balance instrument and a balance ruler to debug first.

Baidu encyclopedia -AB glue