First, the solid wood bed row skeleton
1. Connection between bedside side columns:1* * There are four solid wood side columns, two long ones should be connected with the headboard, and two short ones should be connected with the headboard. Screw the screw into the hole with embedded metal parts, and insert the wooden wedge into the remaining hole. The bedside table, headboard and bedside table are spliced together. The bedside table and the headboard are connected together to form the bedside. Be careful not to install this step backwards, otherwise it will be very troublesome. Splice them together, tighten the nuts, connect them in place, and then assemble them together.
2. Connect the head of the bed and the end of the bed with a bed help: If you don't have rich experience, this step is best done by two or three people. First, put one end of the bed side into the pre-screwed screw at the end of the bed, fix it with screws to prevent loosening, and then connect it to one side of the bed. And so on to the other side of the bed. In this step, pay attention to the symmetry of the hole position on the bed side and the hole position at the head and tail. Generally speaking, the hole faces down. If the hole is in the middle, just pretend.
Second, the purchase skills of solid wood bed row skeleton
1. Wood, commonly known as Qumu, also known as Fraxinus mandshurica, is mainly produced in Northeast China and North China. The wood structure is rough, the texture is straight and bright, and the hardness is high. Fraxinus mandshurica has the characteristics of good elasticity and toughness, wear resistance and moisture resistance, but it is difficult to dry and easy to warp. Raw materials have good processability, but they should be prevented from tearing, with smooth section and good paint adhesion.
2. The row-skeleton bed itself has ergonomic principles, and its concave-convex characteristics make the row-skeleton mattress more elastic, so you can also choose a thinner mattress; Thicker soft mattress is also suitable for row skeleton bed, which will reduce the friction and vibration in front of the mattress and row skeleton bed and make people feel more comfortable.
3. Look at the structure of the row skeleton, whether the ribs are closely combined with the frame without shaking, whether there is abnormal sound when hand pressing, whether the adjusting foot screws are smoothly assembled, whether the positions of the assembly holes are reasonable and whether they meet the requirements of the drawings. (If it is a pneumatic skeleton, observe whether it has normal lifting function, and the maximum horizontal inclination should be within 45 degrees. )
Our family will install beds, but the types of beds are different. So what are the installation methods and purchasing skills of solid wood bed row skeleton? I think through the introduction of the above small series, everyone knows these problems.