Send a watch meaning:

1, boys send girls the meaning of the watch: the meaning of luck, wish you can always have good luck. Watch harmonic confession, expression of love, on behalf of my heart, the meaning of love. It is also the meaning of being with each other forever. Also means eternity.

2, girls send boys watch meaning: is to let you make time to accompany her more. I hope he thinks of her all the time, think of the best times. Always by your side, heralding a lifetime without separation.

3, between friends to send a watch watch meaning cherish everyone's minutes and seconds, heralding a long friendship. I hope the watch will turn out good luck! Hope friends have good luck every day! I hope everyone with a watch, every day is happy, always lucky.

Expanded Information:

Watch buying tips:

1, check the appearance of the watch parts

The appearance of the watch can be inspected from the case, mirror, dial and hour and minute and second hands. The watch case should be free of sand holes and obvious scratches, symmetrical angles; the back cover and the upper shell of the screwed joints should be circumscribed; the two watch rings are equal in distance from the case, and the holes for installing lugs should be centered in the end of the case foot and the depth of the holes should be appropriate, so that the watch ring is not easy to fall off;

The watch mirror should be free of blemishes and scratches, and it should be transparent and bright; the three needles should be installed correctly, and there should be a correct safety clearance between the needle and the needle, the watch mirror and the dial; the dial and the hands should have a correct safety gap; the dial and the hands should have a correct safety gap between the dial and the hands. Gap; dial and pointer plating finish is good, no stains, dial scale lines or luminescent dots completely; handle and case about 0. 1-0. 3mm gap between the case.

2, check the sensitivity of the watch: the sensitivity of the watch refers to the maneuverability of its balance wheel to automatically start the pendulum.

Check method is:

1) will not have been wound up has stopped walking watch gently shake a little, with the help of shaking the force to observe the second hand walking situation: if the second hand in a very short period of time stops walking, it shows that the watch is fully wound up can all go (i.e., the clockwork torque), high sensitivity;

If the second hand for a long time to continuous walking, then it shows that the watch is fully wound up can all go (that is, clockwork moment), high sensitivity;

If the second hand for a long time continuously walking, then it shows that the watch is fully wound up can all walk (that is, clockwork moment). If the second hand moves continuously for a long time, it means that the watch can't go all the way after being fully wound (i.e., the clockwork is still storing torque), and the sensitivity is not high or the tabulator has a malfunction.

2) will not have been wound up to stop the watch, slowly turn the head of the handle, observe the second hand starting situation: the less the rotation of the upper bar handle, the sooner the second hand starts to indicate that the table's sensitivity is higher;

The reverse is the sensitivity is low or there are other faults in the tabulator. But pay attention to the fast pendulum watch because the hairspring stiffness is larger, than the traditional frequency (18000 times / hour) of the watch machine to be a little more on the clockwork ability to start the pendulum. The watch with high sensitivity continues to go for a longer period of time after being fully wound once.

3, check the spacing and position of the watch hands

The watch needle and the mirror, dial, and between the three needles should adhere to a certain spacing, otherwise mutual friction and affect the normal operation of the watch machine. It can be observed by dialing the hands when checking. The position of the hour hand and minute hand and whether the mutual cooperation is normal is checked by: dialing the minute hand and hour hand to 3 o'clock and 9 o'clock, and observing whether the two needles are at right angles; dialing to 6 o'clock, whether the two needles are in a straight line; dialing to 12 o'clock, whether the two needles are reunited or not.

4. Check the watch winding mechanism

Normal watch winding should be easy. Turning the handle on the head of the bar, the first thought of the looser, and gradually the more on the tighter, when can not be continuously forward when turning the handle, indicating that the clockwork has been completely on the full and on the bar mechanism works properly. If turning the handle on the head of the bar, the occurrence of "chattering abnormal sound, or produce the top teeth slippage and other phenomena, it shows that the upper bar mechanism has a fault.

5, check the watch dial mechanism

watch should be motorized, reliable and pointer rotation average when dialing. Check should focus on checking the minute wheel and the center wheel axis friction with the tightness. When dialing the needle, if there is no loose or tight feeling, indicating that the friction of the minute wheel is normal and refueling the right amount, on the contrary, the dialing mechanism has a fault.