Tools: ASUS computer

1. Prepare an 8GU disk, Baidu search and download the small white U disk startup disk making tool and Windows system image file, as shown in the following figure.

2. Open the small white USB boot disk making tool, then switch to "USB boot-USB mode", select the USB flash disk to be made and click "Make USB boot disk with one button" according to the default parameters, as shown in the following figure.

3. to restart the computer, press "one-button USB flash drive startup shortcut key" to select USB flash drive startup. The buttons on different motherboards may be different. Just try F12, F11, Del and ESC one by one, save and exit after selection, and the system will automatically restart, as shown in the following figure.

3. After restarting again, you can enter the Xiaobai PE selection interface, press the arrow keys to select "WindowsPE/RamOS" and press enter, as shown in the following figure.

4. After entering the small white pe desktop, the PE installation tool will automatically pop up. Check the system image to be installed here, then select "Target Partition" in the lower left corner and click "Install System", as shown in the following figure.

5. Start the system installation and wait for the installation to be completed, as shown in the following figure.

6. After the installation is completed, it will automatically restart and enter the Windows system, as shown in the following figure.