What are the dimensions and models of light steel keels? Check out the preparation details.

There are many sizes and specifications of light steel keels. The following are some common specifications:

C-type light steel keels: The common sizes of C-type light steel keels are 50mm× 15mm, 75mm×15mm, 100mm×15mm, etc. The model number usually starts with C, followed by the width and height of the keel, such as C50×15, C75×15, C100×15, etc.

U-shaped light steel keel: The specifications and sizes of U-shaped light steel keel include 50, 75, 100, 150, etc. Among them, the cross-section size of type 50 is 50mm×15mm×15mm, and the cross-section size of type 75 is 50mm×15mm×15mm. The size is 75mm×15mm×15mm, the cross-sectional size of type 100 is 100mm×15mm×15mm, and the cross-sectional size of type 150 is 150mm×20mm×20mm.

Keel selection method

①. Select specifications according to use

First of all, we must determine the use of the light steel keel we purchase, and then select the keel with the corresponding section , such as U-shaped and C-shaped are suitable for the keels of partition walls.

②. Look at the thickness

When choosing a suitable light steel keel, you should pay attention to the thickness of the selected product not less than 0.6mm, and also check the product manual and carefully look at the length and thickness Wait for the situation and then judge with the naked eye.

③. Look at the surface.

Finally, look at the surface of the product. A good strong keel should avoid snowflakes. The pattern should be clear and the hand feels hard, with small gaps.