2. Fill a spoonful of corn or peanuts. (about 30-40 grams)
3. Please install the hood on the machine body, then put the measuring spoon full of corn kernels on the hood, and slowly reverse the measuring spoon until all corn kernels are poured into the machine body.
4. Pay special attention not to pack more corn kernels. Do not put cream, sugar or grease into the inner pot, which will damage the machine. When you want to put sugar, you can add it to the plate after the popcorn is exploded.
5. If you want to add cream or other grease to the popcorn, please put the measuring spoon with the concave upward on the hood, and then add 3 tablespoons of grease to the measuring spoon. The grease will melt in the process of popcorn. Sprinkle hot oil on the popcorn in the tray and mix it slightly.
6. Please put a high-temperature resistant tray at the front and bottom of the popcorn outlet of the machine, and the tray should be slightly larger.
7. Plug in the power plug and turn on the power switch, and your popcorn will be ready in about 3 minutes. Note: this machine is designed to work for a short time, and the longest working time of this machine can't exceed 5 minutes. When it is used again, the machine should be fully cooled down, and generally the full cooling time is about 10 minute.
matters need attention
===
1, do not add grease to the pot in the machine, only sprinkle a spoonful of melted cream on the popcorn and mix well.
2. The maximum weight of popcorn shall not exceed100g.
3. It is very important to choose corn kernels when popcorn is popped. Choose small corn kernels as much as possible. The epidermis of corn is not worn or cracked, and the dry humidity of corn should be moderate. You can't use soaked corn kernels popcorn, so the popcorn cracking degree is not great. 4. When the machine is frying peanuts, soybeans, etc., it should be observed at any time, and it can be poured out after being fried. The freshly fried peanuts and soybeans will become brittle after being cooled.
Maintenance and cleaning
===
1, please unplug the plug from the power outlet after use.
2. Let the machine cool down sufficiently before cleaning. It takes about 10 minutes for the machine to cool down.
3. Remove the measuring spoon and the hood from the base. Pay attention to the fact that if there is grease in the measuring spoon, it is not allowed to drip into the pot in the machine body.
4. The measuring spoon and hood can be washed in warm water with detergent, then rinsed with clear water, and then dried with a rag or sponge, or dried with the hot air of this machine.
5. Turn the body upside down, pour out the unexposed corn kernels in the cavity, wipe its appearance with a hairy rag, and then dry it.
6. Do not immerse the body in water or any other liquid for cleaning.
7. All parts are cooled, dried and stored for next use.