There are many videos and texts on the Internet, you can refer to them. Here we tell you two commonly used methods of bottom adjustment, no hook adjustment and empty hook adjustment. In fact, these two methods can also be combined. Two become one.

Find the bottom: hang heavy lead, keep stroking the buoy until one mesh is out of the way, complete

Adjust the mark: let’s adjust the mark without hook first, the number of meshes is determined according to your own needs. If adjusting the 7 mesh, then stroke down the buoy by one buoy length. This length is not fixed, just to ensure that there is half water after adjustment and hooking. Cut the lead skin to just expose the 7 mesh, and the mesh adjustment is completed.

Check the hook weight by adding two hooks weighing 3 mesh, then the half water in the back of the hook should show 4 mesh.

Determine the bluntest point, and keep lifting the buoy until the mesh number of the buoy just returns to about 7 meshes. At this time, the double hooks are at the bottom. The hanging bait will not affect the condition of the bait bottom. Calibrate with the upper space bean. Then pull the buoy until the buoy is long and hang the bait to determine the most effective point.

After hanging the bait, the buoy has a number of meshes in the semi-water condition. If 1 mesh is exposed, it means that the two baits weigh 3 meshes. The most effective fishing point is to have more than 1 mesh and stroke up multiple times in small distances. buoy, until the buoy appears more than 1 mesh, the following space bean calibration is the most effective point. The area between the smartest point and the dullest point is the fishing range. If the buoy is weighed down after hanging the bait, then the most effective point in theory is flat water. Just lift the buoy to make it flat. However, in order to facilitate observation, it is recommended to set it to 1 mesh, then 1 mesh to 7 mesh are the fishing range. . The fishing target is determined according to the situation and should reflect the real signal as accurately as possible.

If you want to make it blunt again, continue to stroke the buoy up at the bluntest point until the lead falls to the bottom or lies on the bottom. At this time, the lead is about 7 mesh before it hits the bottom, and the sub-line is completely flat after it bottoms out. Lying on the bottom of the water, the number of meshes of the buoy becomes larger. Until you continue to stroke the buoy until the number of meshes no longer increases, the lead pendant also lies completely flat on the bottom of the water, evolving into a state similar to the traditional fishing method. However, strictly speaking, the traditional fishing method is This adjustment is unscientific. If you want to be more effective above the most effective point, then it will evolve into fishing off the bottom, fishing to float, etc. The adjustment mesh should be appropriately enlarged, and the bait can be used to press the unsinkable buoy before fishing. The number of mesh adjustment depends on the situation. Generally larger.

When adjusting the mark with an empty hook, that is, hanging these two hooks to adjust the mark with half water. What is mentioned above is to adjust the mark with an empty hook by adjusting 4 to catch X, that is, when the mark is adjusted with half water, more It’s just two hooks. Other adjustment methods, such as adjustment with bait, can be inferred from the above rules, but the key is to know the hook weight and bait weight.

What is mentioned above is the commonly used adjustment method. Of course, if you want to use traditional fishing or floating fishing, you can ask for the specific details.

You can search for videos, search for adjustments in Baidu and Google videos, there are a lot of them.