First, how to remove the drawer slide rail
1, the first step is to open the drawer as much as possible, and then a long black conical button appears.
2. Step 2: Push down the black long buckle by hand (downward in most cases, but upward is not excluded), and the long buckle will be elongated. At this time, I feel that the slide rail is loose.
3. Step 3: Press the strip buttons on both sides at the same time. Press the bar button with both hands and pull both sides outward at the same time, and the drawer will come out.
Fourthly, this is the final drawing. Black cards are separate. If you just take things, you don't need to pull out the drawer at all, just go in and get them.
Fifth, it is easy to put the drawer back. As long as the drawer is pushed back along the track, the black button will automatically dock with the original card slot, push it to the bottom, and then pull it back, so that it can move freely once or twice.
Second, the introduction of drawer slide rail
Drawer slide rail is a common accessory in furniture. It is a guide rail for drawers or other moving parts, and is often equipped with bearings. The material of the drawer pulley determines the comfort when the drawer slides. Plastic pulley, wear-resistant nylon and steel ball are the three most common drawer pulley materials. When sliding, it is quiet, comfortable and smooth, which is the best way to distinguish the quality of the slide rail.
Third, the drawer slide installation method
First, determine what kind of drawer slide rail to use when installing the drawer slide rail. Generally, three hidden slide rails are used. Please determine the length of your drawer and the depth of the counter according to certain data, so as to choose the corresponding size and install it on the drawer.
Secondly, assemble the five plates of the drawer, screw on the screws, put the drawer on the installed drawer after processing, so that the holes of the adjusting nails match, and then push the locking nails into the locking drawer and the slide rail.
Finally, to install the cabinet, it is necessary to screw the plastic hole on the side plate of the cabinet first, and then install the guide rail removed from it. The slide rail is fixed one by one with two small screws. Both sides of the cabinet should be installed and fixed.
This is how the drawer slide rail is disassembled and assembled. Do you know how to remove the slide rail now? The removal and installation of the drawer slide rail is very simple. When there is something wrong with the drawer in our house, we can check the drawer slide rail to see if it is broken or damaged. If there is something wrong with the drawer slide rail, it must be removed and replaced with a new one, so as not to affect the use of our drawers. You'd better wear gloves when disassembling to avoid cutting your hands.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~