In general, directly copy the system image file directly to the root directory of the U disk can be directly reinstalled system. By the way, we recommend a better compatibility and stability of the boot USB flash drive creation software, and this software does not have the software mandatory bundling. The following is a complete tutorial for reinstalling the system with the U Extreme Speed boot U disk:

Tools: U disk a (not less than 4G)

One, the production of boot U disk

1, with the normal use of the computer from the network to download and install the boot U disk that the production of software (the tutorial use U Extreme Speed), and then open the software and insert the U disk has been prepared;

2, U very fast read out the U disk information, make the following picture of the choice:

3, when the interface shows "U disk boot disk production is complete", click "OK" can be.

4, click on the software interface in the lower right corner of the "simulation startup" button, when the interface as shown in the figure shows that the U disk boot disk production success, hold down the "Ctrl + Alt" key combination to close the window.

5, the win7 or win8 system image file copied to the U has made a good speed USB flash drive (if you want to reinstall the system, be sure to do this step, there are no resources can be downloaded from the rainforest wind or system bar).

Second, into the boot USB flash drive and install the system

1, to make a good U high-speed USB flash drive inserted into the computer to reinstall the system and restart the computer, when the screen displays the logo of the computer brand when you press the startup shortcut (according to the brand of their motherboards compared to the table, such as ASUS, press the "ESC"), enter the startup window, with the help of the arrow keys to select the window, and then press the "ESC". Startup item selection window, with the help of the arrow keys to select the USB disk startup item (as shown), press the Enter key to confirm.

2. After entering the main menu of U Extreme Win PE, select 02 to run U Extreme Win 8 PE Installation and Maintenance Edition (New Machine).

3, into the PE system desktop, the self-propelled system installation tool "U Extreme speed one-key restore system", the installation tool will automatically load the system image package required to install the file, we just need to select the installation of the system's disk partition C disk, and then click on the "OK" button, as shown in the figure:

4, in the next sequential appearances of the two windows, respectively, select the "OK" and "OK" and "OK". The first step is to select "OK" and "Yes".

5, after completing the above operations, the computer will automatically restart. When the computer restarts, be sure to unplug the USB flash drive from the USB port (otherwise the system cannot be installed properly), and subsequent system installations will be carried out automatically by the computer until the system installation is complete.

Reference: