Super practical: jadeite pendant with, wear rope strategy, simple and beautiful!

1, bare stone class inlaid emerald with K gold necklace emerald pendant is divided into inlaid emerald, bare stone emerald.

2, use a lighter to roast the rope, and while it is hot, draw and pinch fine, and then through the pendant hole, the rope end also together through the hole, leaving the appropriate length to tie.

3, the jadeite pendant can be worn directly with a red rope through the past to wear, but also according to the size and weight of the pendant to choose the appropriate location for decoration, worn around the neck or waist. Can also be inlaid with gold, platinum or diamonds on the jadeite pendant, choose a different color of the clasp will increase the beauty, it is recommended to choose brown, brown and other dark colors.

How do you make a pendant from a zucchini?

The jadeite zucchini bracelet can actually be braided cross knot, braided flat knot, braided diamond knot and so on. Cross knot tying method to make three rings lined up in the shape of a cross will be the ring and the rope head in all directions to pull tight jadeite zucchini car hangings. Jadeite zucchini car hangings braided flat knot is mainly used for jade wire strung beads at the bottom of the closing, can be moved to facilitate wearing.

First of all, clean the zucchini is the surface of the dirt and soften the outer skin. Polished with fine sandpaper until the surface is smooth, and then cleaned with water. First, use a pencil to trace the words and patterns to be carved. In accordance with the lettering, use a craftsman's knife to carve out the words and patterns, and the carved words should be concave and convex.

The zucchini lanyard is braided as follows: First, make a loop with a red jade cord overlapping the head and tail. Then use the center of another red cord to make a bird's head knot in the overlapping part, and then use one of the threads to make another bird's head knot right next to it. Hang three more red cords in the same way, for a total **** of four sets.

Method: First, use scissors to cut a piece of string about a foot long, usually red. Bring the rope up and around from the left side, pressing down on the rope below. Then after going flat for a short distance, make another loop to the left, still holding down the rope below. Place the right loop under the left loop.

Hand-knit zucchini tutorial: crochet required materials and tools: thread, crochet hook, scissors, cotton. Steps are as follows: first of all, a few of the most basic terms of the crochet hook, the short needle, pulling the needle, starting the needle, braid the needle, plus needle, minus needle.

How to tie a jade pendant lanyard

First of all, you have to prepare the following tools: scissors, lighter, lanyard. Well, after the tools are ready, we can start.

Bake the rope with fire, draw and pinch it while it is hot, and be able to make it go through the hole. Then pass the rope ends together through the lanyard holes. Leave an appropriate length of tying length such as 1cm. then open the rope end and wrap it around to the other side to tie a knot. Then go around to the other side and tie a knot. Then reverse the knot again.

Fire roasting the rope, while it is still hot, draw and pinch it thin enough to be able to make it go through the hole. Rope end together through the pendant hole (pendant can be placed under a piece of soft cloth, which can prevent the pendant bump damage). Leave the appropriate length for your personal preference. Open the ends of the cord and tie a knot around the other side. Wrap it around to the other side and tie a knot.

Prepare a pendant, braided rope, etc. Pass the rope through the pendant and tie a knot in the rope. Grab the rope of the pendant in your hand with one loop, and then wrap the other end of the rope around your finger with two loops.

First of all, we have to prepare all kinds of tools for wearing the jadeite pendant, including lighter, scissors and most of all the red rope and jadeite pendant. Use the lighter to roast the red rope, while the red rope becomes hot and melted with the fingers to pinch it thin, easy to thread the hole. Thread both ends of the cord into the holes of the pendant.

The binding of the jadeite pendant is divided into three steps, namely, roasting the ropes, tying knots repeatedly and treating the ends. First heat the ends of the two ropes with fire, pinch the ropes together while they are still hot, and then pass them through the holes of the jade pendant, leaving a suitable binding length.

Jadeite jade pendant hand-woven method of the whole

1, first of all, wear the rope, with fire lanyard strokes fine so that it can pass through the hole of the jadeite jewelry. Depending on personal preference to leave the appropriate length of tying length. Open the end of the rope, and then the two ropes from the previous step left the rope later around to tie a knot.

2, prepare 1 jade peace button, 1 pendant rope. Thread the pendant rope through the small hole in the center of the peace button. The other end of the rope from the circle inside through. Threaded through the top of the loop will be twisted up, turn a circle. Thread the other end of the cord through the new loop.

3, the most commonly used jadeite jade pendant knot: snake knot general wear beads and small jadeite are used, shaped like a snake bone, the knot body is slightly flexible, can be swayed. Commonly used in necklaces and bracelets.

4, the first step first cut with a knife for piercing a good rope, which is about 25 centimeters, according to the size of the hanging hole. The end of the jade rope burned, rubbed with your fingers, pay attention not to burn your hands. Pass the rope through the hole in the jade stone, taking care to keep it the same length as the front and back ropes.

5, jade bamboo can be braided flat knot, winding, bird's head knot and other braided rope look good. First of all, to prepare about 6 equal length and size of the rope, usually braiding a jadeite rope need two ropes can be. Flat knot model is to cut the rope into the right size, align the two ends, in the emerald pendant hole knot fixed on it.

6, jade lanyard weaving method: materials needed: buy jade rope online, or buy jade sent jade rope, a lighter. Intercept a section of jade rope, 25 centimeters or so, thickness according to the size of the pendant hole. Burn one end of the jade rope, use your fingers to cut thin.