U disk boot system made with cabbage, how to put the image file in

Step by step method:

1, first search and download the cabbage software to the computer, and then run the main program of the cabbage software, when prompted to insert the USB flash drive, will be inserted into the computer USB flash drive.

2, the cabbage software will automatically detect the U disk, when detected, the cabbage software will automatically select the U disk, if not automatically select the U disk, you can manually select the U disk.

3, select the default mode, the allocation of 600M, the production mode to choose HDD-FAT32. Selected after the "one-key production", will pop up a warning box, make sure that all the options are correct, you can press "OK".

4, the production began, it takes about three to five minutes.

5, the production is complete, the production of a successful pop-up box, you can test the U disk boot situation.

6, download a Ghost XP system image file to the hard disk, and then copy the file with an iso extension to the USB flash drive.

7, plug the USB flash drive into the computer, reboot, most newer computers can press F12 to enter the boot menu, select the name of the USB flash drive, you can enter the USB flash drive to boot, if it is an old computer, please follow the instructions of your own computer, or go online to check the method of starting the USB flash drive.

8, into the U disk boot, select the second "Run Cabbage Win2003PE Enhanced", press Enter to determine.

8, then start loading the PE system.

9, into the PE desktop, usually automatically start the cabbage one key installer, if not automatically start, you can click on the left side of the desktop "cabbage one key installer" icon can run.

10, and then the PE one-click installation tool, start installing the system, you can follow the prompts to operate until the system installation is complete.

After using the Chinese cabbage to make boot U disk, how to copy the image file into the U disk?

1, first download the cabbage software to the computer, and then run the cabbage software main program, the U disk into the computer.

2, the software will automatically detect the U disk, when the U disk is detected, the software will automatically select the U disk, if there is no automatic selection of U disk, you can manually select the U disk.

3, select the default mode, the allocation of 600M, the production mode to choose HDD-FAT32. Selected after the "one key to make", will pop up a warning box, make sure all the options are correct, you can press "OK".

4, after the completion of the production, the production of a successful pop-up box, you can test the U disk boot situation.

5, download a Ghost XP system image file to the hard disk, and then copy the file with the iso extension to the USB flash drive.

6, the U disk plugged into the computer, reboot, most of the new computer can press F12 to enter the boot menu, select the name of the U disk, you can enter the U disk boot

7, into the U disk boot, select the second "Run Cabbage Win2003PE Enhanced Edition", press the Enter key to confirm. The key to determine.

8, then start loading the PE system.

9, into the PE desktop, usually automatically start the cabbage one key installer, if not automatically start, you can click on the left side of the desktop "cabbage one key installer" icon can run.

10, and then the PE one-click installation tool, start installing the system, according to the prompts to operate to the completion of the system installation.

This is the first time I've ever seen a Ubuntu bootloader in my life, and I've never seen one.

Cabbage U disk installation system steps:

1, download Cabbage, install

2, start Cabbage, insert the U disk, after recognition, click on the production

3, download the system image file, use WINRAR to open the file, from which to find a maximum volume of the GHO file decompression out

4, copy the GHO file into the U disk. U disk

5, insert the U disk, restart the computer into the BIOS set the U disk as the first startup item, save and restart

6, insert the U disk, start the computer automatically into the U disk cabbage interface, select the PE system to enter (the actual name of the option is different, but the word PE must be there)

7, enter the PE system in the desktop to find the GHOST tool (the name may be different), open GHOST tools (name may be different), open the GHOST after selecting the U disk GHO, restore the specified to the C disk

8, after the completion of the restoration of the U disk unplugged, restart the computer, the system began to automatically install

9, until you see the desktop is completed

bigbaicai U disk startup disk production tool download: bigbaicai.

I used bigbaicai to create the u disk startup disk, and the U disk startup disk, and I have to make the U disk startup disk, and I have a bigbaicai.

I made a U disk boot disk, and wrote the image file, go into the pe no U disk startup item!

There are two ways to set up the startup item, one, if you are ASUS and other laptops can be in the moment to see the machine keep pressing esc will pop up the startup item, select the u disk can be, if it is the other brand then press F11, it may be popped up,

The second method: is through the bios inside to modify.

How to make win7 u disk boot system Chinese cabbage

1, download and install Chinese cabbage U disk boot disk making tool installed version of the installation program.

2, after completing the installation click on the "Experience Now" button to open the Chinese U disk boot disk making tool. Installation version, and then ready to insert the U disk into the computer u *** interface, successfully connected to the U disk can be seen after reading the information recognized.

3, then use the software to provide good default parameter settings for the production, that is, mode selection HDD-FAT32, allocation selection 500M can be, the last NTFS if you check the box will be in the production of the u disk after the boot disk will be converted to NTFS format, which is characterized by the ability to support the transfer of a single file larger than 4GB, if the user is prepared to prepare for the capacity of the u disk can be selected when more than 4G space The first step in the process is to create a new UEFI interface, which will allow you to easily configure the UEFI interface to your PC.

4, the parameters of the information to determine the correct directly click on the "one-click startup U disk", the pop-up window to click on the OK you can start making U disk boot disk.

5, waiting for the tool to complete the production, there will be a new step of the prompt information, asking whether the simulation of the boot test, if it is the first time to use this tool to create a U disk boot disk friends can click on "Yes" on the production of a good U disk boot disk simulation of the boot test, you can also choose "" exit. The first time you use this tool, you can click "Yes" to make a simulated boot test on the created u-disk.

6, after the completion of the simulated boot test, you need to hold down the ctrl + alt keys at the same time to release the mouse, and then click on the close to exit, remember: do not go deeper into the test boot menu within the option test.

I just made a U disk boot with cabbage, and then how to install the system

Plug in a good startup USB flash drive, boot, self-test, press the screen prompts boot menu hot key, select the U disk, enter, and so on into the pe desktop, run ghost, the root directory of the U disk gho image restored to the C disk, after the completion of the U disk to unplug the restart the machine will continue to be automatically installed, the installation is complete, the startup will be Reboot again, startup is ok

How to use cabbage to make u disk boot loaded system

To cabbage U disk installation Win10 system as an example:

Steps and methods:

A cabbage U disk installation Win10 preparation:

1.first need to download Windows 10 operating system, divided into 32 is located in the 64 bit two The first thing you need to do is download the Windows 10 operating system, which is divided into two 32-bit and 64-bit versions, and if your computer memory is greater than 4GB, we recommend downloading the 64-bit Win10 system.

2. Prepare a USB flash drive with a capacity of at least 8GB and insert it into your computer. Note that in the following write iSO original Win10 image into the USB flash drive, and make the USB flash drive to play, will format the USB flash drive, so if there is important data on the USB flash drive, please note that the first backup to the cloud disk or other computers.

3. Download and install Cabbage Loader in your computer, mainly to make a USB flash drive boot, as well as write the Win10 preview system to the USB flash drive.

4. Open the downloaded and completed installation of the Chinese Cabbage Installer tool, and then switch to ISO mode, and then click on the following browse to find open the first step of the downloaded Win10 system image, and then finally click on the one-click to create a USB boot.

5. The next will pop up a prompt box, mainly prompted, is about to write in the Win10 Preview image to the USB flash drive, and prompted, write to the USB flash drive before the USB flash drive will be formatted, please pay attention to backup data. As you have already backed up the important data on the previous USB flash drive, you can just click Yes,

and wait patiently.

6. After waiting for the progress to be completed, you will see that the USB boot is successful, and the original Win10 image has been written to the USB flash drive, and you will be prompted to test it. In fact, there is no need to test, here directly click "No" can be.

7. Finally, you can go to the USB flash drive in My Computer to check, and then you can see that the capacity of the USB flash drive has been used for a lot of capacity, and there are some system ready to install files written on it.

At this point, it is completed to write the original Win10 iSO system to the U disk, and complete the U disk boot production, the next step is to restart the computer, and then set the bios from the U disk boot, to the end of the Win10 installation process. The following specific steps.

Second, the cabbage U disk install Win10 step by step method.

a.) Restart the computer to set the boot USB flash drive startup

The USB flash drive is still inserted in the computer, and then restart the computer, power on the computer and press the Del key to enter the Bios settings, laptop and desktop into the Bios to set the USB flash drive startup method is different. If you don't know how to set up your computer to boot from a USB flash drive, please read the tutorial:

After you finish setting up your computer to boot from a USB flash drive and save it, your computer will restart, and then you can enter the Win10 installation interface.

b). Win10 installation steps officially started

1. Restart the computer, wait a while, it will pop up Win10 installation interface, the first is to choose the language, time and keyboard, here the default is Simplified Noon, and Microsoft input method, no need to choose, directly click on the next step.

2. In the next Windows installer interface, directly click Install Now.

3. Next, in the Terms of Service license, check "I accept the terms of the license" and click Next.

4. Then you will be prompted to choose which type of installation, it is recommended to choose the "custom" installation, the first upgrade installation can also be, depending on their own choices.

5. Next, you need to choose which disk to install Win10, here choose to install in the system C disk, select the first system partition, click on the bottom of the "Next" to continue to operate.

6. After clicking Next, you will be prompted to "If the selected partition contains previous Windows installation files, then these files and folders will be transferred to a folder named Windows.old. Click Next.

7. The next step is the official Windows 10 installation, which will take a little longer to complete.

8. Waiting for the completion of the computer will automatically reboot, the next are automatically complete the installation, just wait for its automatic completion can be, here need to wait longer, please wait patiently to complete.

win10 preview how to remove the watermark win10 preview to remove the watermark steps

9. After a long wait, the computer will automatically reboot after the computer will enter the Win10 initial setup interface, the first thing you see is to select the Internet settings, if you can connect to the network, you can first connect to the network, the next step in the operation, there is no network of friends, you can continue to Other following operations, skip this step.

10. The next setup is relatively simple, with detailed tips, just follow the prompts, and then click Next all the way through to complete the setup, first of all, the following here, it is recommended to "customize" the settings

11. The account.

12. All the way to the next step, the last local account settings are very important, that is, Win10 login user user, here we need to carefully fill in the computer's user name and login password, set the password to set their own easy to remember, because every time you boot up the back of the need to use this login password, set up after the completion of the click on the bottom of the "Finish!

After the account is created, you'll see a prompt that the app store is being updated.

13. After the completion of the above, you can enter the Win10 system desktop interface.

U disk install system with cabbage U disk boot disk, U disk image installed

U disk install system steps:

1. Make a U disk boot disk. Here we recommend a large cabbage U disk startup tool, a search on the Internet is.

2. U disk boot disk is done, we also need a GHOST file, you can download from the Internet a ghost version of the XP / WIN7 / WIN8 system, or your own GHOST backup of the system disk gho file, copied to the U disk boot disk has been done.

3. Set the computer boot sequence for the U disk, according to different motherboards, into the BIOS keys are also different, common Delete, F12, F2, Esc, etc. Enter the BIOS, find the "Boot", the startup item to "USB-HDD", and then press the "USB-HDD" button. "

Intel^? Rapid Start Technology Intel^? Rapid Start Technology
Intelligent optimization of your PC's performance.

Some computers plugged into a USB flash drive, startup, there will be a startup menu prompts, such as pressing F11 (or other function keys) to start the computer from the USB flash drive, so that the computer can be set up without going into the BIOS startup sequence.

4. After booting the computer with a USB flash drive, run the Cabbage WinPE, the next operation and the general computer on the same operation, you can backup important files, format the C drive, partition the disk, with Ghost restore system backup to install the operating system

Cabbage USB flash drive startup done, the system image is also put in the boot settings u *** -hdd. How to boot up the boot appears invalid

If your u-disk is plugged into the computer is to show removable disks you select u *** -zip show local disks select u *** -hdd your case should be selected u *** -zip