1, before installing the wooden keel ceiling, you need to accurately measure the position of the ceiling and play the horizontal line. The horizontal line should be straight and not tilted. Next, we use an 8- 10mm drill bit to drill holes in the horizontal line, with the hole spacing of 20-30mm and the hole depth of about 50mm. Finally, we will drive the batten into the hole, and the batten should be completely driven without exposing the wall, and the hole position mark should be made right below the batten.
2. Next, we will screen the wooden keel, and eliminate the wooden keel that is moth-eaten and cracked. Then the price fire retardant paint is painted on the surface of the wooden keel, and then we paint a preservative with good moisture-proof, insect-proof and anti-corrosion effects on the keel touching the wall, such as the keel near the wall.
3. Next, according to the design drawings, we will fix the wooden keel on the wall with expansion screws and other methods. Usually, the steps are to connect the derrick first, and then install the main keel and the secondary keel in turn. After the keel is installed, we need to check and adjust the keel frame. If the indoor area is large, a range of springing is allowed, in which the springing height is about 1/200~ 1/3000 of the room span.
4, everyone in the installation to determine the ceiling height position must be careful, the main keel position line, the anchor point of the boom must be clearly pop-up; When we install the ceiling cover, we need to check the keel first to ensure that the keel connection is firmly installed; The wooden keel needs to be treated with anti-corrosion and fire prevention as required.
Xiaobian summary: What is the practice of the wooden keel skeleton of the ceiling? Xiaobian will simply introduce it to you here. I hope that after reading this article, everyone can understand this. If you are in doubt about the installation of wooden keel, you can consult the corresponding construction personnel.