1. Step 1: Find the fixed license plate position in front of and behind the car, especially the four fixed points on the license plate.
2. Step 2: Aim the license plate at the fixed point of the license plate, aim at the license plate, and prevent dislocation after alignment, which needs to be supported by hands.
3. Step 3: Insert the screw into the hole of the fixed point of the trolley.
4. Step 4: Fix the screws with a screwdriver.
Step 5: Tighten the other three fixing points in the same way, but not too tightly.
6. Step 6: Finally check whether it is aligned and make some adjustments.
7. Step 7: Tighten four nuts in turn.
8. Step 8: Tighten the four screw covers to complete the steps of installing the automobile license plate.
Precautions:
Vehicle license plate must be installed with fixed screws, not ordinary screws, and must be installed according to standards. When installing the license plate frame, the distance between the inner edge of the frame and the license plate number must be greater than 5 mm, remember these to avoid unnecessary deduction.
It is illegal to have cartoons on the owner's license plate frame. Many car owners like to decorate their cars with some accessories, but it should be noted that accessories will be punished if they affect the owner's license plate frame.
Refer to the above content: People's Network-Only two fixing screws are installed in the license plate. Do you need to record 12 points? Not reliable!