Precautions for CO2 system A. Keep the gas cylinder upright when using, and do not put it horizontally, away from the heat source. B check the pressure of the gas meter every day, and replace it immediately if the capacity is insufficient. C ensure that the gasket remains in the gas meter connector every time the gas cylinder is replaced. D. When using CO2, the bottle valve should be fully opened, and then rotated 1/4 times, so as to facilitate easy closure in case of emergency and reduce the chance of leakage.
E. After replacing CO2, 3-4 cups of soda should be pumped on one of the valves, so as to discharge the soda without CO2 from the original pipeline. 1, obviously visible height; Improve sales charm. 2. Appropriate space to facilitate ventilation and lift the upper cover for maintenance. 3. Both sides and back are reserved 10 cm or more. 4, the top reserved more than 20 cm. 5, machine size (see equipment parameters)
6. The counter placed shall be of appropriate size and strength to withstand the weight 100 kg of the existing machine. 1, lower water pressure limit 1.8kg/cm2(25psi). 2. The upper limit of water pressure is 3.5kg/cm2(50psi). 3. Within the range of 1 meter from the installation position of the machine. 4, must have a water switch.
5. Water source diameter 1/2 inches. 1, within the range of 1 meter from the installation position of the machine. 2. 220V AC/50Hz/single phase.
3. Independent power supply, with voltage variation within the range of+10% of rated voltage. 1, within the range of 1 meter from the installation position of the machine. 2. There should be a drainage vent to facilitate smooth drainage.
3, pipe diameter more than 3/4 inches.