Youku router installation and setting guide: 1. Connect the Youku router to the power supply, and then connect the WAN interface of the fiber optic modem or broadband modem to the WAN port of the Youku router with a network cable; 2. After the Youku router is powered on, , open the wireless device and search for the wireless network, look for "Youku-XXXX" (XXXX is the last four digits of the router's MAC number, the MAC address is on the back of the router), choose to connect or directly plug the network cable into the LAN port on the back of the Youku router, and plug the other end into on the computer. 3. Connect to Youku_xxxx's WiFi or use a network cable to connect to the router, open the browser, visit wifi.youku.com (or 192.168.11.1) to enter the router configuration page:

4. Click "Quick Configuration", if It is broadband access to the Internet. Fill in your Internet account and password information and click Next. If users who do not need dial-up directly set a dynamic IP, click Next (usually users who set dynamic IP are fiber optic cats that have built-in dial-up or use Youku Router as a Users of secondary routing), in the figure below we use the example of entering the broadband account password:

5. Fill in the WiFi name and password, which can be set freely, and click Save:

6. The Complete Router Configuration page appears. At this time, please re-execute step 2 and connect to the WiFi you just set:

7. Click "Try Now". Note that you can now access the Internet through the router:

8 .The router web management login page appears. Enter the password set in step 5 to log in. The default Youku router login password and wifi password are the same.

9. The Web management page will appear at this time. You can manage the router in the Youku router backend system and set up and bind the account to earn "Youku coins".