It causes machine damage and great product qualification rate in pneumatic equipment, plastic spraying and painting, medicine and health, food and other industries.
The impact of direct economic losses. The following is a common configuration method, which is commonly used in coating, pneumatic instruments and precision.
Keywords dense pneumatic components, powder product transportation, tobacco industry bearings, diving operation, breathing gas, drug packaging, cosmetics, food configuration,
Canned food and other industries.
The main pipeline filter of class C filter can remove a large number of liquid and solid particles above 3μm, and achieve the lowest residual oil.
The amount is only 5ppm, with a small amount of moisture, dust and oil mist. For air compressor, after aftercooler and before other filters,
Used for general protection; Used as pretreatment device before cold dryer.
According to the principle of freezing and dehumidification, the cold dryer forces the compressed air to pass through the evaporator for heat exchange and cooling, so that the compressed air is in the air.
Gaseous water and oil are cooled at the same pressure, condensed into liquid water and oil, and entrained with dust, which is discharged through the automatic drainer system.
So as to obtain clean compressed air.
T-class filtered air pipeline filter can filter out liquid and solid particles as small as 1μm, reaching the minimum residual oil.
Only 0.5ppm, with trace moisture, dust and oil mist. Used for pretreatment before class A filter; Cold dryer and suction dryer
After that, further improve the air quality.
A-class filter ultra-efficient oil removal filter can filter out liquid and solid particles as small as 0.0 1μm, reaching the minimum residual oil.
Only 0.00 1ppm, almost all moisture, dust and grease are removed. It plays a protective role before being used in H-class filter dryer.
Make sure that there is no oil in the air after the air dryer.
H-class filter activated carbon micro-oil mist filter can filter out oil mist and hydrocarbons as small as 0.0 1μm, reaching the minimum residual oil content.
Only 0.003ppm, no moisture, dust and grease, odorless and tasteless. Play a final filtering role, for some must use high
Units with high quality air, such as food industry, breathing, aseptic packaging, etc.