High-power silent air pump, high-atomization spray gun, power cord and socket, Chinese drinking brush, superfine towel, high-density foam, high-power hair dryer, 3M textured paper, 3M superfine sandpaper, brush row, coloring pen, coloring cup, scraper and bucket.
Operation process:
Step 1: Prepare the tools.
Step 2: Use special cleaner for leather (EEES cleaner).
Step 3: Fill and repair the wound (leather patch)
Step 4: Color matching.
Step 5: spray color.
Clean leather
Leather cleaning:
Clean the cortex by removing oil and wax. Suck a little EEES leather cleaner with cotton cloth and clean the leather surface hard. It lays a good foundation for later discoloration and enhanced adhesion. If the steering wheel is clean, it is recommended to use a strong cleaner. Deep cleaning, the sweat of the palm is in contact with the cortex, which requires strong cleaning to get the best renovation and discoloration adhesion.
Step 3 repair the damage
Leather restoration:
Generally, the main repair position is the driver's seat, which is mainly aimed at peeling off the surface of the dermis. For scraper injury and cigarette burn, it can be repaired without hurting the underlying skin. Technology: after cleaning 10 minutes, brush the patch, evenly brush the thin bottom of multiple layers, and blow 15~25 minutes with a hair dryer until it is completely dry. Then smooth it with 800 mesh frosted paper.
Step 4: Adjust the color
Try tone color:
The colors of Hao Wei automobile leather color-changing paint can be mixed with each other, adjusted to the corresponding color system, stirred evenly, and then sprayed and colored. If the wear is serious, you should spray more color. Special attention: to change the dark automobile leather into light color, you need to spray white paint first.
spray paint
To spray with a spray gun:
Do a local test before coloring, and then spray it all over your body. Cross stitch is used for coloring. Don't spray too thick. First, apply the repaired part once or twice with a wool brush. After drying, gently polish it with water sandpaper. Then, the whole body is painted and dried thoroughly.