What is the size of outdoor park chairs?
1, sitting height: the vertical distance between the sitting surface and the ground. Usually, height refers to the height of the chair. The height before sitting should be less than the vertical distance from the calf fossa of the seated person to the ground. Benchmark of suitable sitting height: sitting height = calf _ nest +(25~35)mm heel height-(10 ~ 20) mm. National standard: the sitting height of chairs is 400 ~ 440 mm For leisure chairs (recliners, rocking chairs, sofas, etc.), it is generally appropriate to take 360~380mm (. If thicker soft materials are used, the elastic settlement limit should be taken as the standard.
2. Sitting depth: the distance from the front edge to the rear edge of the chair. The leading edge is 60 mm from the calf. Rest equipment should be no less than 460mm, portable sofa 480 ~ 500mm, medium sofa 500 ~ 530 mm.
3, sitting width: the front width is the width before sitting; The width of the back edge is the width after sitting, not less than 430 mm The width of the armchair is the width of the inner side of the armrest, not less than 460 mm Sitting angle and back angle: the angle between the back inclination angle of the sitting surface and the horizontal plane; The angle between reclining and horizontal plane. The inclination angle of the dining chair is 2-7; Back inclination104108 (72 ~ 76), sofa sitting inclination 4 ~ 7; Anticline106 ~112 (68 ~ 74), dip angle 6 ~15; Back bevel112 ~120 (60 ~ 68). Handrails: The height of handrails is 250mm.
What kinds of chairs are there in outdoor parks?
1, plastic-wood desk and chair G004 Type: one table, four chairs/four stools Features: G004 uses plastic-wood chair strips to make desk and chair surfaces respectively, and the materials are anticorrosive and waterproof, without paint maintenance; The steel structure is welded with galvanized steel, sprayed with plastic, moisture-proof, and does not rust when used outdoors. Especially suitable for courtyards and residential areas.
2. Outdoor wooden tables and chairs G00 1 Type: one table and three chairs Features: G00 1 Material is anticorrosive wood and cast iron chair feet, in which the length of chairs is 1.5m and 0.7m respectively. G00 1 is very suitable for parks, pavilions and courtyards. It is convenient for outdoor use and care, and its service life is about 4-6 years.
3, carbonized wood table and chair G005 type: one table and four stools, integrated design features of tables and chairs: made of carbonized wood+galvanized steel, natural and environmental protection, air purification, anti-corrosion, insect prevention and durability; The integrated design of tables and chairs is very suitable for dining outdoor tables and chairs.
4. Outdoor anticorrosive wooden table and chair G006 type: one table and two stools, integrated design features of tables and chairs: table and chair length 1.5m, table and stool surface is made of anticorrosive camphor wood chair, and the desktop is provided with sunshade holes, which is suitable for placing outdoor parks, shopping malls, leisure areas and dining rest areas. Galvanized steel welded tables and stools, with effective bearing capacity of 600 kg, are anti-corrosive and rust-proof, and easy to clean and maintain.
Now there are many parks where people can rest and exercise after meals, so it is very important to know the size of park chairs. These are the sizes and types of outdoor park chairs that Bian Xiao introduced to you today.