First, the paste method of kitchen wall tiles
1, kitchen wall tile sticking method: leveling, when laying wall tiles, the paved wall must be treated to remove surface dirt, sprinkle water, then evenly mix cement mortar for leveling, and then stick tiles after the leveling layer is completely dry.
2. Brick sticking method for kitchen wall: pull the wire, determine the brick arrangement scheme according to the design requirements of the paving pattern, and pull the marking line on the drying leveling layer. The function of the stay wire is to keep the joints of the tiles straight and keep the tiles vertical.
3, kitchen wall tile sticking method: soak in water, completely put the tiles into clear water, generally 30 minutes; The specific soaking time is subject to the fact that the tiles do not bubble, and then dry water stains are removed for later use.
4. Sticking method of kitchen wall tiles: mix the slurry, use 425# cement (cement P.032.5#) for laying glazed tiles, medium sand is better, and the mixing ratio of cement sand and water is 1: 3 to form paste. The cement label should not be too high, otherwise the tensile force will crack the surface of cement mortar brick and cause engineering quality accidents. If the mixture ratio of cement is too high, the former situation will occur. It is suggested that the fit ratio is better than the mixture: 3.
5, the shop is stuck, spray enough water on the wall, and evenly daub cement mortar on the back of the ceramic tile we want to paste (Step 4: Mix cement mortar). Mortar thickness of 5mm ~ 6mm, placed big wall brick. If it is properly thickened, please tap it with a raft to make it flat and level it with a level.
6, check the ceramic tile is completed, check the empty drum of ceramic tile. We can verify it with a wooden handle with a small blade. When you knock and listen to whether the sound is drumming or failure, it is empty. It is suggested that the hollow tiles should be removed immediately and re-laid.